Intake manifold -BGM PRO- Piaggio 2-stroke - CS = 28mm. Open intake manifold for the Piaggio 2 stroke engines. With it you can finally drive a really large carburetor (Areche 24 mm, Dellort 22-25 mm). With this you can really give your engine the spurs. The motto is more power thanks to more fuel. The design is both [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM small parts for the brake cable fastening are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high quality of the material enables reliable fastening of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6486X Availability: in stock [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 55%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]

bgm - Item number: SC2301 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetor -DELLORTO 20 / 20mm SHB- Vespa PK125 XL2, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber | [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

The bgm Pro kick starter pinions are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. They are manufactured exactly according to Piaggio original dimensions. Always consistently high quality. No compromise. LUBRICATION GROOVE As a special feature, the bgm Pro pinions also have a lubricating groove in the [...]

bgm - Item number: BGM2200BS07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta LI , LIS, SX 125-150, TV 175 (series 2-3), DL / GP 125-150 - 0,7mm are also interested in: Spacer [...]

Please note: Piaggio 50-80ccm automatic vehicles (not PK automatic) generally use PHVA carburettors. The Hyper2 motors (from around 2001) use their own float chamber. This has a drain with hose and a drain plug. These carburettors require the float chamber with item number 1484704. NOTE: If it drips out of the hose, it is not the screw that is leaking, but the [...]

bgm - Item number: 1079157B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm on shaft -BGM ORIGINAL- Vespa 10 Teeth, Ø = 21,8mm, metal (suitable for speedometer worm 9 teeth) - (used in Vespa V50, 50N, 50L, 50R [...]

BGM Pro cable branch to supplement the BGM Pro conversion wiring harness for use with a Vespatronic ignition. PROBLEM The cable colors of the Vespatronic ignition differ greatly from the conventional color scheme of a Piaggio cable harness for electronic ignitions (which is also continued in the BGM Pro conversion cable harness). Piaggio / BGM use green (engine off), blue (luminous flux), black (ground). SOLUTION The BGM Pro cable branch [...]

The BGM 200ccm cylinder is an improved version of the already reliable and powerful original cylinder. Suitable for the 200cc engines of the Rally200, PX200 and Cosa200 models, the bgm cylinder offers additional safety and performance thanks to an exact honing dimension of 9/100 running clearance as well as a slightly increased compression due to a 0,7mm reduction [...]