When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

bgm - Item number: BGM5342 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 135x16mm- Piaggio Boss, Piaggio Boxer, Piaggio Bravo, Piaggio CBA, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Piaggio Superbravo, Piaggio [...]

Suitable for suspension strut BGM7789NB. bgm - Item number: BGM7789NBASP Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Shock absorbers> Springs Other customers who are looking for shock absorber springs rear, soft, black -BGM PRO SC / R12 COMPETITION- Vespa GT, GTL, GTV, GTS 125-300 (all years of construction) are interested, also searched [...]

Lambretta cylinder base gasket with a thickness of 2,5 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

Bigbore exhaust manifold for the banana exhaust from SITO, FACO or Piaggio for Vespa Primavera and ET3 models. PERFORMANCE The exhaust manifold from BGM PRO offers more passage with a diameter of 30mm. The engine can breathe more freely and generates more torque / power. 30 mm elbow for the smallframe Sito / Faco & Piaggio 125ccm banana inner diameter 30 mm material: [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

bgm - Item number: BGM6010S18 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 1,80mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand, it serves as a storage container for amounts of up to 1000ml and at the same time, small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower bottle body and has graduation marks in 10 ml increments up to 60 ml.