Clutch linings are a very important link between the engine and the transmission. A well-functioning clutch is essential for driving fun, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The covering manufacturers deliver the proper quality [...]

Mocking tool for all cast cylinders with a bore of 32-89 mm. The ideal tool to remove tracks quickly and with on-board resources. Even a cordless screwdriver is sufficient. Move the honing tool evenly and slowly up and down in the cylinder and a beautiful cross-cut decorates the cylinder liner in no time. If the piston has also noticed something, you can carefully [...]

NOTE: According to StVZO §56, every motor vehicle in Germany, which also includes mopeds, requires at least one mirror attached to the left side of the vehicle. NUMBER The number of mirrors depends on the first registration (EZ): EZ before 01.01.1990 1 mirror left EZ from 01.01.1990 up to 100 km / h 1 mirror left EZ from 01.01.1990 over 100 km / h 2 [... ]

Open intake manifold for all Piaggio 50-80 intake manifolds with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). Decent increase in performance, as the engine can finally breathe freely. The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, as the original airbox continues [...]

Ingenious little cable branch that enables the retrofitting of a brake light function on vehicles with disc brakes, even before the year of construction 1998. To do this, screw in a brake light switch on the brake pump (if not already present). The cable branch is suitably pre-assembled to be connected directly (incl. Rubber seal). Lead the cables through the steering head and the inside of the frame to the brake pedal and there in parallel to [...]

Now finally for the front too! Turn signals in the trendy clear glass style with LEDs for your Gilera Runner. Of course with E-marking and therefore completely legal. Nevertheless, they not only ensure a tidy and clean front section, but also give the very special street fighter look. The turn signals come particularly well with our clear glass rear light. For problem-free operation [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best performing linings on the market. Manufactured exactly according to our specifications, we have managed to use a very high quality organic pad mixture that is both pressure and temperature stable at the same time. The whole thing combined with a very good grip to always get the full torque [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482SX Availability: in stock [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 50%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]

Cylinder base gasket -BGM PRO- 1,0mm Polini 207, 210, 221ccm bgm - item number: 3820037 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Others Customers who are interested in Spacer cylinder base -BGM ORIGINAL Polini 207 ccm - 210 ccm - 221 ccm- Vespa PX200, [...]