BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

bgm - Item number: 3330286 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Gaskets> Gaskets Other customers who are looking for gasket cylinder head -POLINI 133 ccm Evolution- Vespa PV125, ET3 125, PK125 - 1,0mm are interested, also looked for: Seal | Cylinder head | Head gasket | Cylinder head gasket [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

bgm - Item number: BGM666PXL Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 8,45 kg Category: Engine> Ignition> Ignitions Other customers who are interested in ignition set -BGM PRO 12V Touring - Vespa PX80-200 (1984-), PX125 / 150 (2011-), Cosa125-200, LML125 / 150 (2-stroke) - 2300g are interested, also looked for: ignition | Set [...]

bgm - Item number: BGM4590KTRD Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Spacer for the cylinder base. This allows a cylinder to be raised by the specified amount. Intended to compensate for a longer connecting rod, e.g. by installing a modified PX200 crankshaft in a PX125 housing. The 5mm longer connecting rod of the PX200 (110mm) can be perfectly balanced by the spacer. Without cut-outs for the overcurrent ducts to ensure maximum freedom when reworking [...]

bgm - Item number: 7671268 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,13 kg Category: Frame> Electronics> Taillight lens Other customers who are interested in Taillight lens -BGM ORIGINAL Vespa Antique- Metal small - Are interested in red, also looked for: taillight lens | Taillight lamp lens | Tail light lens | Reversing light glass | Rear light glass | [...]