Third gear with a shorter translation. This gives you a perfect gear connection from 2nd to 3rd gear .. The bgm gear wheels are hardened with 58 HRC and thus correspond to the Piaggio OEM quality. bgm - Item number: BGM01804 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,32 kg Category: Motor [...]

bgm - Item number: BGM7790 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Shock absorbers> Bushings Other customers who are interested in distance bushing rear shock absorber -BGM PRO- Lambretta Serveta interested in assembling Italian shock absorbers, also looked for: Spacer | Shock absorber | Rear | Spacer [...]

Cylinder head gasket -BGM PRO- 1,5mm Polini 177ccm, DR 177ccm bgm - item number: 3820047 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

Rear brake drum "Made in Germany" by Strohspeed for BGM PRO. Suitable for all Vespa models with 8 inch tires (not Vespa Super VNC / VBC). Made of high-quality cast iron, it offers enormous advantages over conventional brake drums made of thin sheet steel: suitable for original and tubeless rims no distortion due to hot brakes perfect concentricity due to exact centering over [...]

Lambretta cylinder base gasket with a thickness of 3,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

Sealing kit as it is also included with the BGM cylinder kit in the same scope of delivery. Contains three foot seals and one head seal. Sealing thicknesses foot seals: 0,2mm - 0,4mm - 0,6mm aluminum head seal: 0,5mm copper With the different thicknesses of the foot seal, the control angle can be finely adjusted to the respective purpose / stroke. Spacer columns made of aluminum are also available for the head for rough spacing.

bgm - Item number: BGM6887S35 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Engine> Rubber parts> Carburettor connecting rubbers Other customers who are interested in connecting rubber with flange inlet system -BGM ORIGINAL Smart Flow- AW = Ø35mm, hole stitch = 60mm - PHBH28 / 30, VHST24-26, VHSH30, TMX27-30, TM28, PWK28, Polini24-30 are interested, also looked for: [...]

The thrust blocks are the connection in the motor between the switching arm and the switching claw. It transmits the angular momentum of the shifter on the handlebar to the claw in the motor. The BGM thrust blocks are made of wear-resistant and high-strength 42CrMo4 material. They renew the switching precision as it was originally available. They should therefore always be exchanged when the [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Lambretta cylinder head gasket with 2,0 mm thickness and 71,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0246 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]