Oversize O-ring in order to achieve a sufficient sealing effect even with a heavily worn out hole for the shift linkage. Please use with grease to avoid damage during assembly. bgm - Article number: BGM12OR7NOS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Gearbox> [...]

bgm - Item number: BGM6477TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 7mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

Suitable for suspension strut BGM7789NB. bgm - Item number: BGM7789NBASP Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Shock absorbers> Springs Other customers who are looking for shock absorber springs rear, soft, black -BGM PRO SC / R12 COMPETITION- Vespa GT, GTL, GTV, GTS 125-300 (all years of construction) are interested, also searched [...]

bgm - Item number: BGM6486 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,23 kg Category: Motor> Brakes> Cable cables Other customers who are interested in the brake cable fastening set -BGM ORIGINAL M6 x 1,0mm- Vespa front PK S, PK XL / XL2, PX (1984-1998), Vespa rear PK S, PK XL / XL2, PX, Rally, [...]

bgm - Item number: BGM1125DPS Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifolds -BGM PRO Banana Sport- Vespa PV125 , ET3, also searched for: Exhaust manifold | Elbow | Exhaust flange | Exhaust manifold | U | [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

The bgm PRO Twist intake manifold combines the possibility of installing a large carburetor with an intake cross-section of up to 30mm (inner diameter of the nozzle on the clamp 34mm) with the great advantage of completely free positioning. The rubber is rotatably mounted if the mounting plate has not yet been tightened. This means that the carburetor could also move forward in the direction of travel

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]