Black RACING variant! The Dellorto carburettors are not only a fixture in the scooter sector. Many scooters come with Dellorto carburettors ex works. The Dellortos are characterized by good tunability and easy assembly. Especially if a Dellorto carburettor was already installed, the change to a larger one is necessary [...]

bgm - Item number: BGM2200K Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Piston pins Other customers who are interested in piston pins -BGM PRO MRB-Racetour 195 ccm - Lambretta LI 125-150, LIS 125-150, SX 150, DL 125-150, GP 125-150 are interested, also looked for: piston pin | [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Complete electronic ignition for Piaggio Ciao and SI The advantages at a glance: stable ignition point even at high speeds, strong ignition sparks, high luminous flux, pole wheel weight: approx. NOTE: A corresponding motor housing is required for the assembly of the ignition: Polini Speed ​​Engine (P1300) Malossi racing housing (M1700210 or M576352) bgm - item number: BGM5717514CI Availability: out of stock (Please check [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

bgm - Item number: BGM7929TL Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Clutch> Tools Other customers who are interested in castellated wrenches clutch nut -BGM ORIGINAL- Vespa Largeframe ( up to 1995), also searched for: Crown nut wrench | Coupling nut | Crown nut wrench | Clutch tool | Wrench | [...]

The CLASSIC Kickstarter impresses with its timeless design. The look is kept very subtle and the CLASSIC fits every occasion. Not only does it look good, it is also superbly processed. The anodized aluminum alloy is actually far too good to trample on. The CLASSIC Kickstarter is assembled in a few simple steps and [...]

Remote air filter system based on the bgm PRO suction hose and a Marchald foam air filter. bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm [...]

Auxiliary jet set -BGM PRO Mikuni TM- (15,0 - 37,5) - (15-17.5-20-22.5-25-27.5-30-32.5-35-37.5) bgm - item number: 2599130 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Carburetor> Carburetor nozzles Other customers who are interested in auxiliary nozzle set -BGM PRO for Mikuni (type: VM22 / 210) TM / TMX - (15 -0-37-5) - [...]

BGM PRO Oversize screw / clamp nipple in excellent quality, manufactured by a supplier for the Japanese motorcycle industry. The BGM PRO Oversize types have five special features: Production to oversize (Ø10.06mm) Stepped collar at the upper end With a wrench surface to hold against (SW = 9mm) With 3.5mm hexagon socket (like original Innocenti) With internal clamping plate to protect the train OVERSIZE The [...]

Cylinder head gasket -BGM PRO- 1,5mm Polini 177ccm, DR 177ccm bgm - item number: 3820047 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

Clever tool from BGM for the damage-free installation of studs. Screw the BGM Pro tool onto the stud bolt and counter with the integrated hexagon socket screw. It is braced with the thread of the stud bolt. Now turn the outer wrench flat. The stud bolt is fixed and is loosened or screwed in. Pay attention to a sufficiently firm counter-locking so that [...]