The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM6478TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 8mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

bgm - Item number: BGM9030 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Screw sets Other customers who are interested in oil drain plug set M8 x 8mm - BGM PRO with magnet- Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), [...]

bgm - Item number: BGM2105SC Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Exhaust inner pipes Other customers who are interested in clamps for exhaust pipes -BGM PRO Clubman V1.0. 4.0-V1- Lambretta series 3-XNUMX are also looking for: Exhaust manifold clamp | Clamp | Exhaust clamp | Exhaust manifold clamp | Hose clamp [...]

BGM 50ccm replacement cylinder. Replacement for all water-cooled Peugeot Jet Force from 2013 and Speedfight 3 and Speedfight 4 scooters. The BGM cylinder is delivered in a kit with piston, piston rings and sealing kit. The original cylinder head from the Peugeot Speedfight 3 & 4 LC and Jetforce C-Tech can still be used. Replaces the Peugeot OEM number T 777327 [...]

BGM Pro water pump housing made of high-strength CNC machined and anodized aluminum. Including hose clamps and seal. Nice upgrade for the water pump, replaces 1: 1 the disdainful original Piaggio plastic part. Nice feature: Integrated drain screw! bgm - Item number: BGM4820BK Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,35 kg Category: Motor> Motor housing> [...]

Crankshaft dismantling and insertion tool set Vespa Largeframe -BGM PRO- Made in Germany Press the crankshaft out of its bearing seat quickly and easily like a professional and pull it back in again. This is possible with the quality tool from BGM PRO. With this set, the crankshaft can be pushed out of its press fit in the bearing of the engine housing in a professional and material-friendly manner and also [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

bgm - Item number: BGM2310M Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Gearbox> Variomatic slide shoes Other customers who are interested in Vario slide shoe set -BGM PRO- suitable for BGM2311, BGM2312 are also looking for: Vario | Sliding shoe | Set | Sliding shoes | Riser guide | Vario guide | [...]

bgm - Item number: BGM6473 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Workshop requirements> Tools Other customers who are interested in crimping pliers with ratchet function -BGM PRO- for end caps cable Outer shell Ø = 4mm, Ø = 5mm, Ø = 6mm are interested, also looked for: Crimping pliers | Crimping tool | Ferrules | Cable lug | Pliers | [...]

If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]