Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

Air filter fleece BGM PRO for Vespa Smallframe V50, 50N, PV, ET3 High quality filter fleece from Marchald (Italy), manufactured for BGM PRO. Suitable for all smallframe motors with sheet metal air filter box. 1: 1 replacement for the original wire mesh. Significantly better and finer filtering. Protects the engine as no fragments of the old wire mesh can be sucked in. Also ideal for performance-enhanced engines with increased [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

BGM PRO Superstrong clutch linings type CR The BGM carbon clutch linings have an organic lining material with very good grip. It offers an ideal balance between performance and durability. The CR single lining is provided with lining material on both sides and therefore fits the following clutch types: Lambretta LTH Liedolsheim (7x) Vespa Smallframe MMW Hartz4 (4x) Vespa Smallframe MMW Hartz5 [...]

bgm - Item number: BGM2105U4DP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifold -BGM PRO Clubman V4.0- Lambretta series 1-3 - unpainted interested, also looked for: exhaust manifold | Elbow | Exhaust flange | Exhaust manifold | [...]

bgm - Item number: BGM8311L Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Seals> Clutches Other customers who are looking for seals for spacer clutch cover -BGM PRO- Vespa 125, VN1T (60001-), VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 150 GL (1956-1958) - Ø = 130mm [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm - Item number: BGM0292HS15 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.5mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. The size M7x25mm is suitable for use as an adjusting screw for the rear brake cable on the engine.