The pole wheel of the V50, PV125, ET3 etc. is flatter than that of the later PK models. Anyone who converts their engine to modern ignition technology (or swaps the entire engine) will no longer get the old original fan wheel cover installed. This is where our spacer comes in, which separates the cover from the pole wheel. Simply place between the cover and the motor housing [...]

Replacement piston for the BGM PRO150ccm cylinder for Vespa Wideframe. Here in the standard size, suitable for the cylinder as it is delivered (no oversize). bgm - Item number: BGM1550PB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 3,20 kg Category: Engine> Cylinder> Cylinder Other customers who are [...]

The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: BGM6010S19 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 1,90mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

Anodized graduated disk to determine the timing of all 2 strokes that have a crankshaft with a 10 or 12 mm thread. This applies to all Lambretta, Vespa and automatic systems, regardless of whether they are 50-80 cc or Maxi engines. All milling work on the cylinder ducts influence the control times, ie how long the ducts are open and thus the [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]

bgm - Item number: BGM6398UG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.6 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, gray - used as a shift cable are interested, also looked for: [...]

Complete exhaust adapter for Vespa T5 models. This means that all exhaust systems of the PX80-125-150 engines can also be used on the T5. Incl. 2x locking nut M8 with collar (not shown). (US) bgm - Item number: 3330592 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,33 kg Category: Engine> Exhaust> Exhaust manifold [...]

bgm - Item number: BGM2506PDC Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,11 kg Category: Frames> Brakes> Brake pads Other customers who are interested in brake pads -BGM PRO SPORT- suitable for BGM PRO 4-piston radial brake caliper are also looking for: Brake pads | Baking | Toppings | Brake | Brake lining [...]