Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

bgm - Item number: BGM79N07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Frame> Fork> Nuts Other customers who are looking for headset cup lock nut h = 7mm -BGM ORIGINAL- Vespa T5, PKXL2, Cosa are also looking for: headset cup lock nut | Castle nut | Lock nut | Lock nut | Counter | Anti-rotation [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. The size M7x25mm is suitable for use as an adjusting screw for the rear brake cable on the engine.

Gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality production (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring ready for direct installation TRANSMISSION OIL CONTROL Place the vehicle on a level surface. Unscrew the oil dipstick [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]

bgm - Item number: BGM2292 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Handlebars> Throttle cable pulleys Other customers who are interested in cable pulley -BGM Pro made by JPP , QUICK ACTION, aluminum CNC- Lambretta LI (series 3 from 1966), LIS (from 1966), SX, [...]

Since the first PX models have now achieved the status of a real classic car, but there have not been any good (if at all) reproductions of the cable harness for the first P and PX series up to 1984, we have this new in a very good quality let hang up. Vehicles from the [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

bgm - Item number: BGM66060P4 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- Type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 4 plug contacts are of interest, also looked for: Plug | Cable | Ignition stator | [...]

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand it serves as a storage container for amounts of up to 500 ml and at the same time small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower body of the bottle and has graduation marks in 5 ml increments up to 25 ml.

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]