Front bgm shock absorber with 16-way adjustable pressure level regulation. Developed as an upgrade for all Vespas with separate shock absorber and spring units. Direct replacement, therefore easy to install. No modifications necessary. Wide adjustment range of the pressure level. In this way you can adjust the compression speed perfectly to your driving style. Hard anodized CNC housing. No registration requirement for pure shock absorbers without spring, therefore without TÜV [...]

Lambretta cylinder head gasket with 2,0 mm thickness and 71,0 mm diameter. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0246 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder head [...]

bgm - Item number: SC2300 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetors -DELLORTO 16 / 10mm SHB- Vespa V50, PK50, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber | [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: 3332779KTB2 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 7,97 kg Category: Frame> Body> Frame parts Other customers who are interested in edge protection including step plate set -BGM ORIGINAL- Vespa PK S, PK S Lusso, PK SS, PK ETS - plastic - black are interested, also searched for: [...]

bgm - Item number: BGM5310BP2 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,56 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 127 × 20 mm for brake drum BGM5310- Vespa 8 "rear, 2 mounts, Vespa VNB4T to VNB6T (h), VBB2T (h) - also used [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Spare part for the BGM PRO Superstrong coupling suitable for Lambretta LI / GP / DL. The coupling base plate has ten spring positions (five are standard) and an exact fit for use with the BGM PRO coupling spider. CNC manufactured from high-strength, nitrided steel. bgm - Item number: BGM8010NG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]