bgm - Item number: BGM66060P1 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 1 plug contact are of interest, also looked for: Plug | Cable | Ignition stator | [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Used to mount the roller bearing of the auxiliary shaft in the small engine half (Lima side). Material: 42CroMo4 (1100Nmm² tensile strength!) Surface: blue galvanized TIP: [...]

bgm - Item number: 7674257 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Workshop requirements> Hose clamps Other customers who are interested in hose clamps (10 pieces) -UNIVERSAL- 25-40mm - Are interested in bandwidth = 9mm, also looked for: hose clamp 10

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

bgm - Item number: 3331765 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Frame> Electrical> Additional instruments Other customers who are interested in cable set for BGM Faster Flow fuel tap -KOSO- Vespa, Lambretta are also interested in: Cable set | Wire | Câbles | Cavo | Cables

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

bgm - Item number: 3332778KTS1 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,22 kg Category: Frame> Body> Frame parts Other customers who are interested in edge protection including tread strip end pieces set -BGM ORIGINAL- Vespa PK S, PK S Lusso, PK SS, PK ETS - plastic - silver are interested, also looked for: [...]

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6495S30 Availability: in stock (Please [...]

bgm - Item number: 1079157KT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Fork> Speedometer drives Other customers who are interested in speedometer worm set -BGM ORIGINAL- Vespa 10 Teeth, Ø = 21,8mm, metal + 9 teeth, l = 31mm, 2,7mm square, black (suitable for speedometer worm 9 teeth) - (used [...]