bgm - Item number: BGM6473 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Workshop requirements> Tools Other customers who are interested in crimping pliers with ratchet function -BGM PRO- for end caps cable Outer shell Ø = 4mm, Ø = 5mm, Ø = 6mm are interested, also looked for: Crimping pliers | Crimping tool | Ferrules | Cable lug | Pliers | [...]

The CLASSIC Kickstarter impresses with its timeless design. The look is kept very subtle and the CLASSIC fits every occasion. Not only does it look good, it is also superbly processed. The anodized aluminum alloy is actually far too good to trample on. The CLASSIC Kickstarter is assembled in a few simple steps and [...]

bgm - Article number: BGM4960 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,71 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System Ø = 20mm- Vespa Smallframe V50, V90, PV125, ET3 - chrome are interested, also looked for: main stand | Stand | [...]

Lambretta bgm PRO MRB RaceTour membrane piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is the perfect choice if you have converted your RT 195 cylinder to diaphragm control and have a durable [...]

bgm - Item number: BGM0333 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (12x17x13mm) - Minarelli 50 cc (12mm piston pin), Piaggio 50 cc, Vespa 50 cc, Honda 50 cc, Kymco 50 cc, SYM 50 [...]

Oversize O-ring in order to achieve a sufficient sealing effect even with a slightly knocked out hole for the shift linkage. Please use with grease to avoid damage during assembly. bgm - Item number: BGM12OR7N Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Seals> [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

bgm - Item number: SC2300 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,61 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetors -DELLORTO 16 / 10mm SHB- Vespa V50, PK50, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber | [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHBN series is mainly used on vehicles with Minarelli engines bgm - item number: 7673422 Availability: in stock (Please check [...]