The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

England was the only market where Lambretta sales outpaced Vespa sales. The main reason for this is the excellent marketing strategy of the Lambretta Concessionaires. The success story of the Lambretta is documented extensively and in great detail in Stuart Owen's book about the Lambretta Concessionaires (Article No. 3332513). In addition to special models and special color combinations, there was also the Pegasus bench. The was [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

The tires are indisputably one of the most important components of our scooters. It establishes contact with the road and is therefore not only responsible for safety but also to a large extent for driving pleasure. The goal was to develop a tire with which you can iron through curves and roundabouts in wet conditions as well as in dry conditions [...]

bgm - Item number: BGM0223S20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 2.0mm are interested, also searched for: Spacer | Cylinder base | Distance seal | [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

bgm PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The bgm Pro brake shoes are manufactured exclusively for bgm by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. Like the original, the brake disk is made of aluminum. MATERIAL + PERFORMANCE The pad mixture for the bgm PRO brake pad has a high coefficient of friction averaging [...]

The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the best-performing linings on the market. The heavy-duty organic pad mixture is created for the high pressures and high temperatures in racing. The high-quality covering material is thinner than a conventional cork covering. This enables the installation of an additional friction disc in the entire Racing Red pad package. Semi-organic covering material [...]

bgm - Item number: BGM6398UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.6 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, black- used as a shift cable are interested, also looked for: [...]

Gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality production (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring ready for direct installation TRANSMISSION OIL CONTROL Place the vehicle on a level surface. Unscrew the oil dipstick [...]

Air filter fleece BGM PRO for Vespa Smallframe V50, 50N, PV, ET3 High quality filter fleece from Marchald (Italy), manufactured for BGM PRO. Suitable for all smallframe motors with sheet metal air filter box. 1: 1 replacement for the original wire mesh. Significantly better and finer filtering. Protects the engine as no fragments of the old wire mesh can be sucked in. Also ideal for performance-enhanced engines with increased [...]

bgm - Item number: 8000065 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Seals> Seals Other customers who are interested in the membrane intake manifold seal -BGM PRO- Lambretta TS1 , also searched for: poetry | Diaphragm intake manifold | Diaphragm intake manifold seal | Membrane seal | Membrane box seal | Diaphragm manifold seal | [...]