Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Manufactured exactly according to our specifications, we have managed to use a very high quality organic pad mixture that is pressure and temperature stable on the one hand, but is still low in wear. The whole thing combined with a very good grip to always have the full torque on the rear wheel. Even with a very high spring force used, the separation path is [...]

bgm - Item number: BGM6010S26 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,60mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

bgm - Item number: 7673423 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frame> Electrics> Carburettor components Other customers who are interested in mixture adjustment idle gas screw set -DellOrto PHBL 22-24-25 / PHBH 28-30 carburettor interested, also looked for: Mixture adjustment | Idle screws | Set | Screw | Adjusting screw | [...]

bgm - Item number: BGM4511 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who wanted brake lever set -BGM PRO CNC Sport, long (165mm) - Vespa LX, LXV, S, Primavera 50-150, Sprint50-150 - chrome are interested, also looked for: brake levers | Brake handle [...]

bgm - Item number: BGM8522A Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in carburetors -BGM ORIGINAL PHBN 12- Minarelli 50 ccm (Elektrochoke) - AW = 23mm, also looked for: Carburettor | Carburetor | Gasifier | Atomizer | [...]

Our tuning fan wheel not only looks good, it also cools your engine better. This makes it ideal for tuned engines. Of course, it also looks great on standard engines. The bgm PRO Racing is also lighter than the series part. Due to the lower centrifugal mass, the engines hang more poisonously on the gas and can turn further. Technique tip: [...]

20-piece trim screw set. The kit contains 20 pieces each. Screws with pan head and tapping screw thread as well as 20 pcs. Speed ​​nuts. Ideal for connecting the vast majority of trim parts on, for example, Piaggio / Gilera / Yamaha / MBK / Aprilia vehicles. Dimensions: Screws: Ø screw head: 12mm Ø thread: 5,0mm screw length (without head): 15mm sheet metal nuts: length: 20mm width: 13mm bgm - item number: 7673431 Availability: in stock (Please check [...]

High-quality CNC sports levers from bgm PRO for vehicles with cable brakes at the front. Suitable for Vespa Largeframe models built in 1957-1998: PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180 Smallframe built in 1963-1989: V50, 50N, V90, PV125, ET3 , PK S *, PK XL1 * Milled from solid aluminum, with an elegant, resistant, hard-anodized surface. Ergonomically clear [...]

bgm - Item number: R14403 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM ORIGINAL- CPI Oliver, Hussar , Popcorn, Formula, Bingo, GENERIC XOR, Cracker, Toxic, Pandora, Sirion, XOR2, KEEWAY Ry8, Fact50 (Focus), ATU (Explorer) Spin, [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with Grimeca or LML brake pumps. Suitable for Vespa PX from 1998-2003 as well as all LML vehicles / brake pumps. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal [...]