BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

The right measuring tool to set the gear backlash, the contact distance or the valve clearance. bgm - Item number: 1800013 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Workshop requirements> Tools Other customers who are interested in Feeler Gauge -UNIVERSAL- 20 blades, metal - 0.05- 1.00mm + 0.002-0.040 inch are also looking for [...]

BGM small parts for the brake cable fastening are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high quality of the material enables reliable fastening of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6485X Availability: in stock [...]

Combined throttle / shift cable reel from BGM. It can be used as a large throttle pulley with quick throttle function. Conventional shift pulley. The larger diameter allows the existing carburetor to be opened more quickly and, above all, completely. Even carburetors with a cross-section of 30mm can be used comfortably in everyday life without having to use a noticeable external quick throttle. By [...]

The BGM PRO 177 piston rings are extremely break-proof, have very little friction due to their coating and are very torsion-resistant. With a thickness of 1mm, they are also suitable for very wide and high outlet shapes. The rings are packed in pairs. The piston rings with 63,0mm diameter also fit: 177 / 187ccm Parmakit 177 / 187ccm Polini Alu 177 / 187ccm Pinasco [...]

bgm - Item number: BGM1770BS15 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are looking for Spacer cylinder base -BGM ORIGINAL 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1,5mm interested, searched [...]

High-quality wheel axle that is absolutely dimensionally stable * compared to many other axles offered on the market. With the axle offered here, the wheel is perfectly guided again. The bearing surfaces are hardened as in the original, thus guaranteeing a long service life. SINGLE-SIDED LOADING The one-sided suspended front wheel of the Vespa causes an asymmetrical distribution of forces on the front wheel bearings [...]

bgm - Item number: BGM4590KTGB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

Assembly set for reinforced chain tensioners. This set consists of a washer plate that successfully prevents the chain tensioner from bending open. In addition, M 6 studs are included in the scope of delivery, which, in contrast to the screws usually used, considerably protect the thread. The set is rounded off by locking nuts, which make the locking plate superfluous. Security fanatics who wear belts and suspenders [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The course of the throttle grip is horizontal and the stroke is 38 mm. This makes it ideal for carburetor sizes up to 35 mm. The processing is on a very high level down to the smallest detail. The scope of delivery includes rubber protection against rainwater and, above all, against coarse dirt such as those found in the terrain. [...]