bgm - Item number: BGM80RTH Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,13 kg Category: Motor> Tools> Tools Other customers who are interested in flywheel holders -BGM PRO- Vespa all largeframe, all smallframes (long arm also for pole wheels with small diameters, e.g. PK / BGM Pro) are looking for [...]

BGM clamping plate sets as well as their individual parts are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high material quality enables reliable clamping of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6482SX Availability: in stock [...]

BGM PRO exhaust socket set to seal the exhaust at the cylinder socket. Suitable for all PX200, Rally200 and Cosa200 (Cosa models only with gray cast iron cylinder as standard) DIAMETER Each cylinder type (Malossi, Polini, Quattrini, Pinasco) unfortunately has its own diameter at the outlet, which differs slightly from the original. SEAL AND CLEAN The bgm Pro sockets help in a simple way to permanently seal this point [...]

Cylinder base gasket -BGM PRO- 1,5mm Polini 177ccm bgm - item number: 3820041 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Polini / Parmakit 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, searched [...]

Air jet set specific for the Dell'Orto carburetor SI24 / 24G (e.g. Vespa T5). The carburettors specified with the ending 'G' have a lower overall height than those with the suffix 'E' or 'D'. For this reason, shorter auxiliary and air jets are used in the 'G' carburettor types. The T5 models almost exclusively have an air jet of size 120 ex works.

The BGM BigBox Touring - power for the big tour Torque from idle with the optics and acoustics like a standard exhaust The BGM BigBox Touring is the tour steamer in our range. Developed for full thrust from the lowest revs. Ideal for all original engines or moderate tuning cylinders such as BGM177 but also DR135 / 177, Pinasco or Polini [...]

Clutch basket BGM PRO Superstrong 2.0 ULTRALUBE - Pinasco Edition (toothed crankshaft stub) Extremely resilient clutch, very easy to use - Made in Germany The Superstrong 2.0 CR clutch combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

The main nozzle of the SI carburetor determines how much gasoline is made available for the so-called premix or pre-expansion. The larger the displacement and the higher the liter output, the greater the need for spraying, roughly speaking. The available palette ranges from 90-160. A 102 main jet has a bore of 1,02mm, and is therefore less [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM2225HS20 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 2,0 - XNUMXmm are interested, also looked for: Spacer | [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

Those who convert their GTS to handlebar end mirrors can use these covers to make the existing mirror holes disappear. So everything looks like it was at the factory again. The carbon style variants are a special option. Simple exchange bgm - item number: BGM4590KT Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frames> Brakes [...]