bgm - Item number: BGM7811LEV Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake-clutch levers Other customers who are interested in brake levers (radial pump) -BGM PRO Radial black interested, also looked for: brake pump | Radial | Pump | Hand brake pump | Brake fitting | Brake fitting | Brake [...]

Engine oil dipstick BGM PRO made of CNC machined, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality manufacture (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring Ready for direct installation ENGINE OIL CHECK Do not run the engine warm, if necessary ~ 10min. let cool down. Vehicle [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

bgm - Item number: BGM2280 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Frame> Handlebars> Shift gas pipes Other customers who are interested in gas pipe -BGM ORIGINAL- Vespa PX , PK S, PK XL1 - l = 177mm Ø = 24mm, also looked for: Gas pipe | Inner tube | Gas wave | Throttle [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Clutch linings are a very important link between the engine and the transmission, and a well-functioning clutch is essential for driving enjoyment, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The lining manufacturers always deliver the decent quality [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Very good OEM quality bgm - item number: 950308 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Gearbox> Kick starter pinions Other customers who are looking for kick starter pinions with spring -BGM ORIGINAL - Are interested in CPI 50 cc, also searched for: Kickstart pinion | Kick starter wheel | Kick starter drive | Kicker pinion | [...]

bgm - Item number: BGM4570 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Frame> Brakes> Brake-clutch levers Other customers who are interested in clutch levers -BGM PRO CNC cable - Vespa Largeframe 1957-1998 - PX, T5, Sprint, Rally, GT, GTR, TS, VNA, VNB, VBB, VBA, GS, SS180, Smallframe [...]

BGM Pro SC SPORT shock absorber for Vespa Wideframe such as Vespa VM, VN, VB, VL and GS150 -Sporty- Convenient -Adjustable -With TÜV- With factory pre-configured damping, spring preload continuously adjustable. Suitable as a direct replacement shock absorber for all wideframe models from 1955. Up to and including model year 1954, the spring and shock absorber are separate. The upper shock absorber mount provides a remedy here [...]

Nice spare part that enhances every restoration. Complete with screw and kick starter rubber. Chrome plated. bgm - Item number: SCK709 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,26 kg Category: Motor> Gearbox> Kickstarter Other customers who are interested in Kickstarter Vespa Sprint150 (VLB1T), Sprint Veloce , GT125 (VNL2T), GTR125 (VNL2T), GL150 [...]