The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: 7672702 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Frames> Cables> Cables Other customers who want universal train inside -Ø = 1,6mm x 1750mm, nipple Ø = 5,5mm x 7mm- used as a shift cable - turned interested, also looked for: Zug | Universal | [...]

bgm - Item number: BGM9310Z Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Seat> Seat spigot Other customers who are interested in seat mounting plate / strike plate -BGM ORIGINAL- Vespa PK50 (V5X1T), PK50 S (V5X2T), PK80 S (V8X5T), PK125 S (VMX5T), PK50 S automatic (VA51T), PK80 S [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you here. In addition to quality bearings, the kit also includes high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are only supplied by Corteco. bgm - Article number: BGM1109 [...]

bgm - Item number: BGM0223S15 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL- Vespa V50 , PV125, ET3, PK50, PK80, PK125 - 1.5mm, also searched for: Spacer | Cylinder base | Distance seal [...]

Carburetor revision sets from BGM PRO contain high-quality spare parts to restore an existing carburetor to its factory condition. In addition to the seals, the set also contains the very important float needle. This ensures that the carburetor does not overflow and the engine has a stable idle. TIP: For a perfectly sealing surface, the float needle seat (usually made of brass [...]

The bgm PRO Racing shaft with 51 mm stroke is perfect for class 1 of the ESC and people who need a stable shaft for ambitious road tuning. The proven crank webs of the 54 mm shaft are used here. The larger cheek diameter was retained here to provide the necessary, higher overlap on the crank pin and thus additional [...]

BRAKE CALIPER SET BGM PRO RADIAL suitable for LML Star / Stella -MAXIMUM DECELERATION WITH MAXIMUM SAFETY- BRAKE CALIPER BGM PRO 4-PISTON RADIAL The BGM PRO 4-piston brake caliper increases the effective piston and pad area of ​​the front brake system and thus enables braking performance at motorcycle level. With 4x25mm brake pistons, the BGM PRO brake caliper has 40% more piston area than a conventional two-piston brake caliper [...]

Cylinder head gasket -BGM PRO- 1,5mm Polini 177ccm, DR 177ccm bgm - item number: 3820047 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

These are our BGM PRO Superstrong Lambretta front brake cables. They have a strong Ø2,5mm inner cable diameter and a firmly pressed cable holder on the outer shell. Both improve the braking process considerably. Innocenti made a similar modification in May 1966 with the last models of the DL series which were equipped with a disc brake. The cable thickness has also been increased. [...]