The bgm PRO Superstrong is the plug n play coupling solution for small frames - Made in Germany. Special features: Ready-to-install 4-disc clutch with organic racing pads Spring force (springs BGM XL) designed for up to 22HP / 20Nm Separates perfectly cold and warm Easy to use No changes to the cover / housing necessary Without keyway (half-moon wedge) Manufactured and assembled in Germany Delivered ready for installation [...]

Special tool - Made in Germany Dismantling tool for bearing type NBI253815. Suitable vehicles: Vespa PX, Cosa, Sprint Veloce. PK ETS Is used to remove the needle bearing cage of the crankshaft bearing from the small engine housing. To do this, dismantle the small motor half, remove the shaft seal and insert the tool from the shaft seal side. Heat the motor housing and remove the bearing with light blows.

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set can be used on almost all Vespa largeframe models: Vespa [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set can be used on almost all Vespa largeframe models: Vespa [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

Replacement piston, for the original Vespa - 200cc cylinder. Complete with piston rings, bolts and clips, of course. Installation clearance: 0,21 (Italian dimension) bgm - item number: 9020177 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,34 kg Category: Motor> Cylinder> Piston Other customers who for piston -BGM ORIGINAL- [...]

bgm - Item number: BGM6475B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,40 kg Category: Workshop requirements> Trains Other customers who are interested in outer cover -BGM ORIGINAL, PE inner cover- Ø outside = 5mm (l = 25 meters) - interested in black, also looked for: outer shell | Train | Coat | Outer cable | [...]

bgm - Item number: 1083608 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Rubber parts> Bushings Other customers who are interested in bushing silent rubber shock absorber / motor -BGM ORIGINAL ( Made in Germany) Ø = 9mm x 48mm- Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, [...]

Special rear wheel bearing from BGM PRO for the Lambretta motors of series 1 to 3. The special bearing made only for the Lambretta has an integrated shaft seal. The assembly of the shaft sealing ring is not necessary with the BGM bearing, the high-quality sealing ring (NBR) is already assembled. The internal clearance is adapted to the assembly characteristics of the Lambretta motors. It is completely [...]

The CLASSIC Kickstarter impresses with its timeless design. The look is kept very subtle and the CLASSIC fits every occasion. Not only does it look good, it is also superbly processed. The anodized aluminum alloy is actually far too good to trample on. The CLASSIC Kickstarter is assembled in a few simple steps and [...]