The BGM PRO variator dethrottles the drive and enables significantly better acceleration and a higher top speed. The roller tracks have been specifically calculated for each model. The sliding surface of the belt has been optimized for better grip. Thanks to the very good sliding properties of the rollers (including a sliding varnish-coated riser disc), this variator - completely gentle on the engine - already brings up [...]

bgm PRO suction hose with increased volume in front of the carburetor compared to the original suction hose. The intake hose is available with four different connection sizes on the carburetor: 40 mm (e.g. Dellorto PHBL 25), 42mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width on the air filter is [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

bgm - Item number: BGM2290B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Motor> Gearbox> Coupling arms Other customers who are interested in switching scales set incl. adjusting block -BGM Pro made by JPP, aluminum CNC- Lambretta LI, LIS, SX, TV (series 2-3), SX, DL, GP - black anodized [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]