Exhaust spring -ANTI RATTLE- stainless steel - 50mm: Stainless steel spring anti-vibration rubber Both heads can be rotated 360 ° Here you will find the luxury version of the exhaust springs, easy to hang in, rust-free and thanks to the rubber coating, completely rattle-free. bgm - Item number: BGM0903 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Exhaust [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM9310Z Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Frame> Seat> Seat spigot Other customers who are interested in seat mounting plate / strike plate -BGM ORIGINAL- Vespa PK50 (V5X1T), PK50 S (V5X2T), PK80 S (V8X5T), PK125 S (VMX5T), PK50 S automatic (VA51T), PK80 S [...]

BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

bgm - Item number: BGM21090WLAC Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in wiring base plate -BGM ORIGINAL HP V3.0 AC- Lambretta DL, GP - electronic ignition are interested, also looked for: ignition | Alternator | Lima | [...]

Stud BGM Original for the gear lever / crankcase of the Vespa 80-200ccm largeframe engines. Made of high tensile strength steel with a rolled (rolled) thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press polished. This results in a highly resilient and permanently durable thread. Tightening torque M7: 13-18Nm Scope of delivery: 6x stud bolts M7x50mm bgm - Article number: BGM2750S Availability: [...]

Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Perfectly suited to block the drive via the clutch basket and to be able to loosen the clutch nut, screw of the front sprocket and even the fan wheel nut. bgm - Item number: 8099003 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Motor> Clutch> Tools Other customers who are interested in [...]

Specific plugs as used by Piaggio in the Vespa PK, PX and Cosa models as well as almost all automatic vehicles. Perfect for re-wiring your own cable branches or for restoration. We also have the matching connector housings. TIP: The contacts should be processed with crimping pliers for optimal contact and tensile strength (see accessories). [...]

bgm - Item number: BGM0292HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.0mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]