BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The bgm PRO membrane block comes with a powerful two-flap membrane. The GRP platelets are state of the art for optimum response behavior and high performance. In addition, the GRP plates have an extremely long service life, which means that maintenance is reduced to a minimum. The light metal block is vulcanized with rubber. This means that the platelets not only seal [...]

Very nice replica of the original rear light of the Rally, Sprint and Primavera models. Both the processing quality, the shape and the pattern of the glass are very close to the original from SIEM. Only the test marks of the original SIEM glass are not available. Delivery incl. Mounted upper plastic cover, without fastening screws. Scope of delivery: rear light glass rear light glass cover (fully assembled on the rear light glass) lamp holder [...]

Carburetor revision kit -PWK- Keihin. All wear parts in one handy set to overhaul your PWK carburetor. Idle adjustment screw not suitable for original Keihin carburetors! bgm - Item number: BGM8500G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Service> Carburetor revision kit Other customers who are interested in [...]

Cylinder base gasket -BGM PRO- 1,5mm Polini 177ccm bgm - item number: 3820041 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are Interested in spacer cylinder base -BGM ORIGINAL Polini / Parmakit 177 ccm- Vespa PX80, PX125, PX150 - 1.5mm, searched [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]

Clutch pads BGM PRO Superstrong 'Big Ear' Racing type PK XL2 / FL2 / HP (also suitable for V50, 50N, PV, ET3, PK S, PK XL) - 4-disc CR80 pads with extra wide tab for all smallframe motors Pad type with 1x large bracket for maximum support in the clutch basket Sintered lining material such as Honda CR80 Suitable for all smallframe clutches Lining thickness (incl. carrier material): [...]

bgm - Item number: BGM2225HS20 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 2,0 - XNUMXmm are interested, also looked for: Spacer | [...]

Assembly set for reinforced chain tensioners. This set consists of a washer plate that successfully prevents the chain tensioner from bending open. In addition, M 6 studs are included in the scope of delivery, which, in contrast to the screws usually used, considerably protect the thread. The set is rounded off by locking nuts, which make the locking plate superfluous. Security fanatics who wear belts and suspenders [...]

Diaphragm plates are subject to natural wear, similar to piston rings and clutch shoes. The membrane plates should therefore be replaced at regular intervals. With the bgm ORIGINAL membrane blocks we offer you a cheap replacement in original equipment quality. Since everything is already pre-assembled, the change is quick and easy even for inexperienced screwdrivers. bgm - Item number: R100560020 Availability: on [...]

Lockable stainless steel tank cap for the Vespa PX Lusso and PK XL. High-quality processed and very practical - because lockable- tank cap for the Vespa. Offers ideal protection against the rarer 2-stroke mixture thieves and the common sugar lump throwers. bgm - item number: 5250040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,21 [...]