BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

The BGM Pro exhaust manifold is made of stainless steel and therefore rust-free forever. It replaces the original Piaggio manifold 1: 1 and is characterized by its good fit (made in Europe). A connection for the lambda probe is available as with the original. If necessary, insert this on the thread with a little copper paste. ORGINAL AND SPORTS EXHAUST The manifold is [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO STREET transmission oil SAE80 * - API GL3 Classic single-grade oil as prescribed by Innocenti for its engines. It perfectly covers everyday load conditions. Suitable for series and high-end engines. Mildly alloyed, ideally suited for oil bath clutches Well-adhering, pressure-resistant lubricating film Excellent oxidation stability Wear-inhibiting * The SAE80 specification, unlike Vespa, relates to the [...]

Practical quick coupling that is mounted in the fuel hose. If, for example, the tank or the carburettor is to be removed, the hose at the coupling is disconnected. The internal valves prevent fuel leakage on either side of the clutch. They can be separated quickly at the push of a button with just one movement and can be easily closed again by sticking them together. [...]

High-precision BGM PRO auxiliary shaft axis for the bearing of the primary drive of the Vespa P 200E, Rally180, Rally200 models. Made of extremely resilient and tempered 42CroMo4V steel. Qualitatively not comparable with cheaper replicas. This means that the primary drive can be repaired with 100% factory specifications. Mandatory equipment for tuned engines. INFO: The auxiliary shaft axle has a bearing surface on which the [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

bgm - Item number: BGM6476TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 6mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

bgm - Item number: BGM2225HS Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,5 - XNUMXmm are interested, also looked for: Spacer | [...]

SEALED connectors are sealed and thus offer a very high level of protection against water, dirt and dust (class IP67). They are perfect for use in areas where temperature, water, oil and gasoline resistance are important. Smaller than the commonly used sealed plugs, the types offered here are perfect for the on-board electronics of two-wheelers.