Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

High-quality CNC sport levers from bgm PRO for vehicles with hydraulically operated front disc brakes with HengTong type brake pump. Suitable for Vespa PX built in 2004-today. Milled from solid aluminum, with an elegant, hard-wearing hard anodized surface. Ergonomically much better than the original levers, they offer better performance and feedback. Also ideal for braking with only two [...]

bgm - Item number: BGM2246 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Motor housing> Stud bolts Other customers who are interested in stud bolt set Lambretta engine cover -BGM ORIGINAL- LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP are interested, also searched for: stud bolts | Set | [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output due to maximum number of windings Proven excitation coil with copper plate for maximum reliability Pickup with [...]

Indicator set that consists of two encapsulated LED light strips. Incl. E-marking, so it can be used on public roads without any problems. As a rule, a corresponding flasher relay is necessary for the proper operation of the LED strip in order to ensure proper timing. Alternatively, series resistors can also be set in order to offer the series relay a corresponding load. Super small indicators for 12V [...]

BGM PRO Superstrong Carbon Clutch Linings Type CR The BGM carbon clutch linings have a significantly harder and more wear-resistant lining material than the standard BGM linings. This makes them even more temperature-stable, but they also need a certain basic temperature to develop sufficient grip. They also require higher spring rates than the standard lining material in order not to slip with the same engine torque. [...]

bgm PRO air filter box for the Lambretta series 1-3. The starting point is a SIL air filter box. A connection piece to the frame with a diameter of 50 mm is hard-soldered into this. The diameter of the airbox corresponds to that of the frame. The box and the air filter connector are powder-coated in white. All additional work has been carried out on site in Cologne. Included [...]

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

BGM PRO silent rubbers made of polyurethane. Significantly tighter than the original rubbers, they reduce natural movement to a minimum. The damping works in a defined and precise manner. This makes the vehicle appear much tighter and the dampers respond more quickly. The set contains the two rubbers for the shock absorber on the front axle. The rubbers sit on the shock absorber and are each [...]

The float level of the SI carburettors is not adjustable. If the float level is too low, it comes to full load jerks and a dangerous emaciation. This can be due to the use of a Cosa float chamber on a SI24 / 24E carburettor of the PX models. The swimmer of the Cosa lies lower and reduces the swimmer's level. The spacers offered here raise [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]