High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]

bgm - Item number: BGM12ORKTLF Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,60 kg Category: Motor> Clutch> Seals Other customers who are interested in O-ring set 2-piece clutch cover - BGM ORIGINAL- Vespa PX, T5, GT / GTR (VNL2), TS (VNL3), Super (VNC / VBC), GL150 (VLA), GL150 ACMA (VGL1), Sprint (VLB1), GS160 [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

BGM Pro SC SPORT shock absorber for Vespa Wideframe such as Vespa VM, VN, VB, VL and GS150 -Sporty- Convenient -Adjustable -With TÜV- With factory pre-configured damping, spring preload continuously adjustable. Suitable as a direct replacement shock absorber for all wideframe models from 1955. Up to and including model year 1954, the spring and shock absorber are separate. The upper shock absorber mount provides a remedy here [...]

Cylinder head gasket -BGM PRO- 1,5mm Pinasco 213ccm bgm - item number: 3820042 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who Interested in spacer cylinder head -BGM ORIGINAL Pinasco 213 ccm- Vespa PX200, Rally200 - 1.5mm, also looked for: Spacer [...]

We were so dissatisfied with the quality of all silent blocks that we took on the matter. The main focus was on reducing vibrations, and we tested all possible combinations of silent blocks. Different hardnesses and different hardnesses on the left and right side. We now have good degrees of hardness for the left and right side [...]

The BGM Pro horn rectifier is a high-quality replacement part for the Piaggio horn rectifier of the Vespa PK, PX, T5 and Cosa models, which is no longer in production. In addition, it has an integrated blink relay for LED blinkers and an output for USB sockets. Regulated direct current output for the horn (12V DC) 12V USB charging output with up to 3A charging power 12V flasher relay [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers only have a slightly increased degree of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm motorsilent rubbers, the chassis gains directional stability, steering precision and rigidity. The assembly is simple and offers eg [...]

NOTE: According to StVZO §56, every motor vehicle in Germany, which also includes mopeds, requires at least one mirror attached to the left side of the vehicle. NUMBER The number of mirrors depends on the first registration (EZ): EZ before 01.01.1990 1 mirror left EZ from 01.01.1990 up to 100 km / h 1 mirror left EZ from 01.01.1990 over 100 km / h 2 [... ]

Perfect for building your own wiring harness. bgm - Item number: BGM4753 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 4mm- 5m - black , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | [...]