BGM clutch pinions are bulletproof. Developed for the enormous power and torque of today's engines, they are made from high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high [...]

Cracked! A pull rope can digest incredibly large loads. The tear limit of the trains we offer is several tons of pulling force. In a pinch you can even tow cars with it. Why a train breaks anyway depends on the fact that it is loaded incorrectly. Zugkiller No. 1 is the so-called common cast ridge. The brake-clutch levers are often [...]

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

The bgm PRO clutch steel discs are manufactured exactly flat and allow the clutch to be separated precisely. The clutch can be perfectly dosed thanks to the very good concentricity. Perfect concentricity No burrs Good controllability of the clutch Linings separate cleanly Suitable as a replacement for the original steel discs, no modifications necessary. We recommend BGM Pro Street gear oil as a lubricant [...]

RECOMMENDATION We recommend a low-alloy gear oil of classes API GL3 / GL4, even for high-performance engines, in order to prevent the clutch from slipping even under extreme loads. This also applies to our BGM Superstrong / Superstrong CR couplings. The old engine oil specification SAE30 corresponds to today's transmission oil specification SAE 85W / 90. (US) bgm - Item number: BGM8290CRKT Availability: out of stock (Please check the [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 28.5 / 28.5mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]

Material: The BGM crankshafts are forged like in the good old Piaggio times. During forging, the material is pressed together under high temperature and high pressure. This results in a higher density of the material. Heat is dissipated much better. The material is more resistant to distortion. This is a huge advantage compared to the crankshafts manufactured by other manufacturers whose used [...]

bgm - Item number: BGM2200K Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Piston pins Other customers who are interested in piston pins -BGM PRO MRB-Racetour 195 ccm - Lambretta LI 125-150, LIS 125-150, SX 150, DL 125-150, GP 125-150 are interested, also looked for: piston pin | [...]

bgm - Item number: BGM0333 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (12x17x13mm) - Minarelli 50 cc (12mm piston pin), Piaggio 50 cc, Vespa 50 cc, Honda 50 cc, Kymco 50 cc, SYM 50 [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]