The BGM 200ccm cylinder is an improved version of the already reliable and powerful original cylinder. Suitable for the 200cc engines of the Rally200, PX200 and Cosa200 models, the bgm cylinder offers additional safety and performance thanks to an exact honing dimension of 9/100 running clearance as well as a slightly increased compression due to a 0,7mm reduction [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

bgm - Item number: BGM6606GTS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Frame> Electronics> Turn signals Other customers who are looking for cable adapter kit for turn signal conversion -BGM PRO update 2003-2013 => 2014- Vespa GTS 125-300 rear - used for indicators from 2014 onwards in vehicles before 2014 are interested, [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality production (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring ready for direct installation TRANSMISSION OIL CONTROL Place the vehicle on a level surface. Unscrew the oil dipstick [...]

bgm - Item number: 7674074 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Crankshaft> Shim washers Other customers who are looking for a Shim -DIN 988 similar- 31x26x1,0mm (used for ball bearing 6305), also searched for: Shim | Shim | Centering washer | Bearing washer | Ball bearing washer | [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

bgm - Item number: BGM12OR16NOS Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Gearbox> Seals Other customers who are interested in O-ring 16 × 2,7mm - BGM ORIGINAL, 1st oversize - used for kick starter shaft Vespa V50, PV125, ET3, PK, PX, T5 125ccm, Cosa, Rally, Sprint, TS, GT, GTR, [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Perfectly coordinated carburetor kit. The scope of delivery includes the bgm PRO 17 carburetor, the bgm PRO intake manifold, sport membrane and all the small parts required for assembly. The bgm PRO carburetor is super easy to tune. The PHBN series is widespread and so all tuning parts are easily available. The open BGM PRO intake manifold fits perfectly onto the carburetor [...]