If the mirror holes in the handlebar trim of the GTS models from 2016 are to be closed, this is difficult to implement due to the uneven trim in this area. The specially manufactured cover caps from BGM PRO are an optical and technically first-class solution. These are made of the same material as the handlebar cover and exactly follow the design.

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

BGM Pro SC COMPETITION shock absorber - sporty - comfortable - adjustable - with TÜV - HARMONIOUS The BGM Pro SC COMPETITION suspension impresses with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. The damper can be adjusted 16-fold in the rebound damping. Thus, with a simple [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Cylinder head gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5161 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Malossi 139/166 ccm- Vespa PX80, PX125, PX150 - 0.8mm, [...]

High quality ignition base from BGM. Specially developed for converting contact-controlled motors to maintenance-free electronic ignition. The base plate has been modified to fit the engine housing built before 1977 and has a longer cable branch so that the ignition base plate can also be perfectly mounted on older vehicles. After the conversion, the former 6Volt on-board network has [...]

Light switch for PK / PX Lusso models from 1984, only suitable for vehicles without battery but with horn rectifier. The German Lusso models do not have a battery (with the exception of the Elestart models) and use AC power on the frame. There is a separate rectifier to control the horn (black box under the left side hood with green / black striped connection cables). This [...]

Front bgm shock absorber with 16-way adjustable rebound adjustment Developed as an update for all types of fork springs. Works particularly well with the progressive BGM Pro fork springs. Easy to install, fit directly onto the standard additional shock absorber mounts. No welding work or further modifications required. Perfect addition to the rear bgm shock absorbers. The damper should be installed in such a way that the adjuster [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

Throttle cable elbow set, as it is used as standard on our BGM carburettors. The throttle cable guide is not screwed tightly into the carburetor cover, but remains pivoted. The guide is attached with a clip on the underside. In this way, covers that have a thread (which may be defective) can be converted or reused without any problems. Including solid brass adjusting nut for [...]