Perfectly matching new edition of the leg shield edge protection for the Vespa PK50 S, PK80 S, PK125 S and PK125 ETS models. The PK S / PK ETS models have, compared to all other models, an inverted flanging of the leg shield edge. The PK S / ETS-specific edge protection was therefore not available for years. The edge protection is available in: Silver (PK S [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

Complete exhaust adapter for Vespa T5 models. This means that all exhaust systems of the PX80-125-150 engines can also be used on the T5. Incl. 2x locking nut M8 with collar (not shown). (US) bgm - Item number: 3330592 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,33 kg Category: Engine> Exhaust> Exhaust manifold [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

Cylinder base gasket -BGM PRO- 1,0mm Polini 207, 210, 221ccm bgm - item number: 3820037 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Others Customers who are interested in Spacer cylinder base -BGM ORIGINAL Polini 207 ccm - 210 ccm - 221 ccm- Vespa PX200, [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

Precisely manufactured nozzle suitable for all original and BGM PX200 cylinders. Other replica nozzles as well as partly new original Piaggio nozzles often have questionable undersize on the thread. The BGM PRO nozzle, however, fits 100%. Also ideal to replace an old worn nozzle. Is simply screwed into the cylinder (normal right-hand thread). bgm - item number: [...]

Cable branch for the handlebars of the Vespa PX models up to 1984 in Italian design, without battery. These can be recognized by the ignition lock with a white plastic housing in the handlebar cover. Supplement to the vehicle wiring harness. Can be used for all models without a battery and four connections on the ignition lock (the German version with a battery has eight connections). bgm - Item number: SC5006HB Availability: in stock [...]