Fine-knitted glove BGM Protection A breathable back of the hand ensures extra comfort. 100% nylon fine knit for a perfect fit. The PU coating ensures optimal grip and a high sense of touch. At the same time, it protects the palms from dirt and oil. Ideal for work that requires both a high level of protection and a good sense of touch. 100% polyamide black black [...]

Special tool - Made in Germany Dismantling tool for bearing type NBI253815. Suitable vehicles: Vespa PX, Cosa, Sprint Veloce. PK ETS Is used to remove the needle bearing cage of the crankshaft bearing from the small engine housing. To do this, dismantle the small motor half, remove the shaft seal and insert the tool from the shaft seal side. Heat the motor housing and remove the bearing with light blows.

bgm - Item number: 3331562 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Frame> Handlebars> Bushings Other customers who wanted bushing outer tube -BGM ORIGINAL- LML Star - Brass 27,2 × 23,8 × 16 mm - also used for handlebar repair Vespa PX are interested, also looked for: shift tube [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

Front shock absorber pair bgm COMPETITION with 16-way adjustable rebound and compression regulation. Thanks to the expansion tank, the COMPETITION dampers are fully suitable for racing and were successfully driven by the Replay team in the 2018 English BSSO racing series. Compared to the BGM Pro Sport dampers, they offer a wider setting range, respond even better and are thermally very stable due to the larger oil volume. [...]

bgm - Item number: BGM79N07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Frame> Fork> Nuts Other customers who are looking for headset cup lock nut h = 7mm -BGM ORIGINAL- Vespa T5, PKXL2, Cosa are also looking for: headset cup lock nut | Castle nut | Lock nut | Lock nut | Counter | Anti-rotation [...]

BGM PRO crankshaft for Vespa Wideframe models made from high-alloy forged blanks. Ideally suited in connection with the BGM PRO 150cc wideframe tuning cylinder. The crankshaft is designed as a heavy-duty tuning crankshaft, but of course it is also a clear recommendation as a virtually indestructible shaft for original engines. Stroke: 57mm connecting rod length: 110mm piston pin: Ø15mm connecting rod bearing: needle roller bearing (top and bottom) A [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

TIP: Please always assemble piston rings carefully. Piston rings made of cast material are only elastic to a limited extent and break relatively quickly. Some pistons have trapezoidally profiled piston rings (so-called keystone rings), these only fit in one installation position. If the ring does not move freely, please loosen it carefully and put it back in 'upside down'. Very helpful tools for work [...]

For permanent fixation, stickers need a clean, smooth and degreased surface. Our brake cleaner, for example, is very suitable for degreasing. In the case of larger areas to be glued, it is always an advantage to spray the area with a little water before gluing. The water can also be mixed with a few drops of detergent to make it [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]