BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

bgm - Item number: 7676252KT Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,21 kg Category: Motor> Motor housing> Retaining plates Other customers who are interested in retaining plate set ignition coil / CDI -BGM ORIGINAL - Vespa PX 80 (V8X1T), PX 125 (VNX1T, VNX2T), PX 150 (VLX1T), PX 200 (VSX1T), Rally 200 (VSE1T [...]

Contains the most useful needles for tuning the PWK series from 21-30mm Kyajet - PWK tuning tool (click) bgm - item number: 2599134 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor needles Other customers who were interested in needle set -BGM PRO- suitable for [...]

bgm - Item number: BGM2293 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Gearbox> Screws Other customers who are interested in oil level control screw -BGM Pro made by JPP, aluminum CNC- Lambretta LI, LIS, SX, TV, DL, GP, J, Lui - silver anodized are interested, also looked [...]

bgm - Item number: BGM8015W Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Ball bearings Other customers who are interested in disc for axial needle roller bearings AXK 1024 / NTB 1024 - AS 1024- (10x24x1mm) - (used for clutch pressure plate BGM8015) are also looking for: needle roller bearings [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

Connection cable between tank sender and vehicle wiring harness. No longer available from Piaggio, now available as a high quality reproduction from BGM. Like the original: with cable ties around the rubber bougier tube to the frame, wiring harness-specific connector Suitable for all Vespa PX models from 1984 with plastic fuel tank sensor. Also suitable for Vespa T5 and PK XL with plastic tank sender. bgm - Article number: SC5008 Availability: on [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Exact copy of the legendary Giuliari Ancillotti bench from the 70s and 80s. Pressed metal frame High-quality and sturdy seat foam. Hand-sewn cover. Optional yellow or white Giuliari lettering. The seat is also suitable for use with a pillion passenger. The combination of continuous upholstery makes it exceptionally comfortable. In contrast to the original, which served as a template, the area [...]

The pistons of the BGM177 cylinder are manufactured by the renowned Italian piston manufacturer METEOR. The piston has a high silicon content. As a result, it has less thermal expansion, is more wear-resistant and thermally very stable. PISTON RINGS Two 1mm thick piston rings, also made in Italy, minimize friction and thus increase performance and speed stability. Otherwise they are identical [...]