Conversion wiring harness for retrofitting to: PK alternator or PK motor in 50N special with indicator (angular steering head) The conversion to a more modern alternator / ignition type is a tried and tested means to be on the road more permanently and safely. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported, on-board electrical system.

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

Front shock absorber -BGM PRO SC COMPETITION- for Vespa Largeframe Rally, Sprint, GT / GTR, TS, GL, Super, VNA, VNB, VBA, VBB Wideframe V30-33, VM, VN, VL, GS150 / GS3, VB, ACMA (1952-), Hoffmann Königin The BGM PRO SC Competition shock absorber is a further development of the successful BGM PRO F16 Sport series. The competition series differs optically through the [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

The bgm PRO pole wheel nuts are available for dL / GP or Li / TV / SX pole wheels. These differ in the outer diameter of the nuts. The Li / TV / SX also fits the dl / GP pole wheels, but has a smaller contact surface. The BGM pole wheel nuts have. Thanks to the 42CrMo4 material used, the nut is able to withstand the required tightening torque of 75 Nm despite the fine thread and [...]

bgm - Item number: BGM79N07 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Frame> Fork> Nuts Other customers who are looking for headset cup lock nut h = 7mm -BGM ORIGINAL- Vespa T5, PKXL2, Cosa are also looking for: headset cup lock nut | Castle nut | Lock nut | Lock nut | Counter | Anti-rotation [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

bgm - Item number: SCK1801L Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Clothing> T-Shirts Other customers who are interested in T-Shirt -BGM Supercharged- black - L are interested also searched for: Tshirt | Maglietta | Tshirts | Clothing | Present | Gift | Gift idea | Christmas gift [...]

Fork springs for all Lambrettas of the Li family (Li, LiS, TV, GT, SX, DL, GP). The springs are 10% harder than the original Lambretta fork springs and are made for us in Germany. The springs are block-stable and shot-peened. Since the wire surface is most heavily loaded with springs, shot peening is more important for dynamically highly loaded [...]