Carburetor revision sets from BGM PRO contain high-quality spare parts to restore an existing carburetor to its factory condition. In addition to the seals, the set also contains the very important float needle. This ensures that the carburetor does not overflow and the engine has a stable idle. TIP: For a perfectly sealing surface, the float needle seat (usually made of brass [...]

BGM Pro SC SPORT shock absorbers -Sporty- Comfortable -Adjustable-With TÜV- Sportiness paired with outstanding optics. With factory pre-configured damping, spring preload (pre-load) continuously adjustable. HARMONIOUS The BGM Pro SC SPORT coilover kit convinces with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. [...]

bgm - Item number: BGM6477TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 7mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Used to mount the split barrel bearing type NU204 on the crankshaft of the Vespa Smallframe models. The tool takes [...]

Contains the most useful needles for tuning the PWK series from 21-30mm Kyajet - PWK tuning tool (click) bgm - item number: 2599134 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburetor needles Other customers who were interested in needle set -BGM PRO- suitable for [...]

bgm - Item number: BGM2225BS03 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO RaceTour- Lambretta SX 200, TV 200, DL / GP 200 - 0,3mm are also looking for: Spacer | Cylinder base | Distance seal [...]

Minarelli starter motor Nice spare part in OEM quality Ducati part number 641010000 bgm - item number: BU6730 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,38 kg Category: Engine> Gearbox> Starter motors Other customers who for starter motor - starter -BGM ORIGINAL- Minarelli 50 ccm (type MA, MY, CW, CA, [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

bgm - Item number: BGM2794 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 94mm -BGM ORIGINAL- Vespa Largeframe (1957-) are also looking for: Engine housing bolts | Motor housing studs | Set | Motor screw set | Engine bolt set [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Complete set, which unfortunately often becomes due when thieves were at work. bgm - Item number: R246050181 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,43 kg Category: Frame> Body> Locks Other customers who are interested in lock set -PEUGEOT- Speedfight2 (not WRC models), X-Fight, Vivacity are interested, searched [...]