bgm - Item number: BGM1925 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Motor> Gearbox> Variomatic weights Other customers who are interested in weights -bgm original 19 × 15,5mm - 9,20g, also searched for: Weights | Role | Vario roll | Variator roller | Vario rolls | Rolls | Variator | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM1770BS08 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder base -BGM PRO 177/187 ccm - Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 0,8mm interested, searched [...]

Cylinder head gasket -BGM PRO- 1,5mm Pinasco 213ccm bgm - item number: 3820042 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who Interested in spacer cylinder head -BGM ORIGINAL Pinasco 213 ccm- Vespa PX200, Rally200 - 1.5mm, also looked for: Spacer [...]

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

Polrad BGM Pro Electronics - for conversion to fully electronic CDI ignition The BGM PRO pole wheel is a very high quality reproduction of the original Piaggio PK pole wheel that is no longer available. We have invested in brand-new molds and can therefore now offer the popular pole-changing pole wheels in fantastic quality at a very fair price. FEATURES Weight smallframe [...]

bgm - Item number: BGM7987 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,77 kg Category: Frames> Wheels> Rims Other customers who wanted rims -BGM PRO tubeless 2.10-10 inches Aluminum Vespa (type PX) - Vespa Smallframe V50, 50N, Special, PV, ET3, PK50-125 (S / XL / XL2), Largeframe PX, T5, [...]

bgm - Item number: BGM6010S23 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are looking for gear shims -BGM ORIGINAL- Lambretta Series 1-3 - 2,30mm are interested, also looked for: Gear shim | Thrust washer | Washer gear | Gear disc | Spacer [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Very nice replica of the original rear light of the Rally, Sprint and Primavera models. Both the processing quality, the shape and the pattern of the glass are very close to the original from SIEM. Only the test marks of the original SIEM glass are not available. Delivery incl. Mounted upper plastic cover, without fastening screws. Scope of delivery: rear light glass rear light glass cover (fully assembled on the rear light glass) lamp holder [...]

The bgm Pro clutch pressure plates are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the plates extremely resistant to wear. The plates are then precisely sanded, so that the pressure pad with a flat and hard surface finds perfect working conditions. The pressure plates are manufactured exactly according to Piaggio original dimensions. Always [...]