bgm - Item number: BGM460ADJ Availability: not in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Handlebars> Brake-clutch levers Other customers who are interested in adjusting lever set for brake lever Set -BGM PRO Sport, adjustable + foldable- Vespa GT, GTL, GTS 125-300 (Hengtong brake system) - red anodized interest, also searched [...]

bgm - Item number: BGM4950 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,72 kg Category: Frame> Body> Main stand Other customers who are interested in main stand -BGM PRO Soft Stop System- Vespa Largeframe Sprint150 (VLB1T), Rally180 (VSD1T), Rally200 (VSE1T), GT / GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T), VNB2T to VNB6T, [...]

Throttle cable elbow set, as it is used as standard on our BGM carburettors. The throttle cable guide is not screwed tightly into the carburetor cover, but remains pivoted. The guide is attached with a clip on the underside. In this way, covers that have a thread (which may be defective) can be converted or reused without any problems. Including solid brass adjusting nut for [...]

bgm - Item number: 7671525 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Clutch> Spacer Other customers who are interested in Spacer clutch cover -BGM PRO- V50, PV125 , ET3, PK50, PK80, PK125 - 1,0mm, also searched for: Spacer | Clutch cover | Spacer | Distance seal [...]

This kit shifts the pivot point of the shock absorber to the height of the wheel center. This controls the shock absorber directly, without any translation. This improves both the responsiveness as well as the originally very strong tendency to brake nod. The damper does not hit as quickly, the vehicle is safer to drive. The driving behavior is already very close with this kit [...]

BGM PRO Superstrong Carbon Clutch Linings Type CR The BGM carbon clutch linings have a significantly harder and more wear-resistant lining material than the standard BGM linings. This makes them even more temperature-stable, but they also need a certain basic temperature to develop sufficient grip. They also require higher spring rates than the standard lining material in order not to slip with the same engine torque. [...]

Cylinder head gasket -BGM PRO- 2.0mm Polini 177ccm, DR 177ccm bgm - item number: 3820054 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

BGM hoses are manufactured according to our specifications especially for the needs of Vespa and Lambretta scooters. The butyl content is over 55%, which makes them extremely airtight and absolutely reliable. The high butyl content makes the hose expensive to manufacture, but in our opinion the result justifies the effort. The valves are in model-specific [...]

bgm PRO wiring harness for all Lambrettas with electronic ignition. The wiring harness is made with as few cables as possible, so it corresponds to the ideal of minimal electronics. The wiring goes to CDI, voltage regulator, headlight connector in the steering head, brake light switch and taillight. There are no annoying clipboards. A piece of bougier tube for the cable branch of the ignition base plate is included in the scope of delivery. The wiring harness [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

bgm - Item number: BGM2290B Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Motor> Gearbox> Coupling arms Other customers who are interested in switching scales set incl. adjusting block -BGM Pro made by JPP, aluminum CNC- Lambretta LI, LIS, SX, TV (series 2-3), SX, DL, GP - black anodized [...]

Grip, cornering, directional stability, handling, wheelspin, braking behavior? All of these are demands that your chassis must be able to cope with. bgm offers the right damper for every application. The bgm ORIGINAL shock absorbers are high quality oil pressure shock absorbers at a bargain price. In contrast to the original shock absorbers, the bgm suspension struts are adjustable in the spring preload. So they let [...]