BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: SC5012 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Rubber parts> Rubber parts Other customers who are interested in rubber hose for cable ignition base plate -BGM ORIGINAL- Vespa PK interested, also looked for: rubber hose | Cable | Ignition stator | Hose | Cable rubber | Ignition rubber [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: BGM1550BS20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL lamp bottom- Vespa Wideframe 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T - 2.0mm are interested, also looked for: Spacer | [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

bgm - Item number: BGM6490X Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,70 kg Category: Frames> Wheels> Clamping nipples and screw nipples Other customers who are interested in rear brake cable clamping plates -BGM ORIGINAL- Lambretta D (1953-), LD (1953-), E, ​​F, LI, LIS, SX, TV, DL, GP - 10 pieces [...]

Lambretta cylinder base gasket with a thickness of 1,5 mm for the small engine blocks with 125-193 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, turned cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

Suitable for suspension strut BGM7790B. bgm - Item number: BGM7790BASP Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Shock absorbers> Springs Other customers who are looking for shock absorber springs rear, soft, black -BGM PRO R12 COMPETITION, 365mm- Vespa Primavera 125, Vespa Primavera 150, Vespa Sprint 125, [...]

BGM PRO Superstrong clutch linings type CR Suitable for the BGM Superstrong type CR clutch for Vespa Largeframe (PX / Cosa / T5, Rally etc.) This CR lining set contains: 3x clutch disks with two sides 1x clutch disc with one side This makes it suitable for all Vespa Largeframe Superstrong clutches of type CR. NOTE: For Lambretta LTH Liedolsheim and Vespa Smallframe MMW Hartz couplings [...]

Cylinder base gasket -BGM PRO- 1,5mm Pinasco 213ccm bgm - item number: 3820043 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who Interested in spacer cylinder base -BGM ORIGINAL Pinasco 213 ccm / Piaggio 200 ccm- Vespa PX200, Rally200 - 1.5mm, also searched [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The material is spared. Used to mount the inner needle bearing (facing the wheel) of the front brake anchor plate of the Vespa PX, T5, Cosa and PK models. [...]