Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

bgm - Item number: BGM6010S21 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Gearbox> Shims Other customers who are interested in gear shims -BGM ORIGINAL- Lambretta series 1-3 - 2,10mm are also looking for: Gear shim | Thrust washer | Washer gear | Gear disc | [...]

bgm - Item number: BGM1770PP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Piston pins Other customers who are interested in piston pins -BGM PRO 177/187 ccm- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - Ø15mm are interested, also searched [...]

Seal for the RD350 membrane in the original form. bgm - Item number: 7670427 Availability: not in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Seals> Seals Other customers who are interested in sealing membrane intake manifold -BGM ORIGINAL- type Yamaha RD350 YPVS are also looking for: Seal [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The CLASSIC Kickstarter impresses with its timeless design. The look is kept very subtle and the CLASSIC fits every occasion. Not only does it look good, it is also superbly processed. The anodized aluminum alloy is actually far too good to trample on. The CLASSIC Kickstarter is assembled in a few simple steps and [...]

Cylinder head gasket -BGM PRO- 2.0mm Polini 177ccm, DR 177ccm bgm - item number: 3820054 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

bgm - Item number: 1083608 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Motor> Rubber parts> Bushings Other customers who are interested in bushing silent rubber shock absorber / motor -BGM ORIGINAL ( Made in Germany) Ø = 9mm x 48mm- Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, [...]

The bgm PRO air filter is the perfect replacement for all Series 1 and Series 2 (up to year of construction 01.1961) paper filters from the original air filter box. Thanks to the fine-meshed stainless steel net, the bgm filter not only offers excellent filter performance, but also a significantly improved air throughput than the standard part. When using filter oil, the filter performance can even [...]

bgm - Item number: BGM6399UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,29 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.9 mm x 2500mm, sleeve = 2200mm, nipple Ø = 8.0mm x 8mm, inner sleeve PE, black - used as a clutch cable, front brake cable are interested in looking [...]

bgm PRO stud bolts (tie rods) for fastening the cylinder and cylinder head to the engine housing of all Lambretta series 1-3 models. High strength and with solid collar nuts in an extra high design. Perfect for all powerful cylinders that require a solid engine base. In principle it can also be used on Vespa 180-200cc engines. As a rule, however, these are for the use of the original Piaggio bolts [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]