Cover plate to close the opening for the electric starter in the air duct of the motor housing of the PX, T5 and Cosa models. Useful if the electric starter is removed or is not available. This means that no valuable cooling air is lost. bgm - item number: 7671454 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. [...]

The pistons of the BGM177 cylinder are manufactured by the renowned Italian piston manufacturer METEOR. The piston has a high silicon content. As a result, it has less thermal expansion, is more wear-resistant and thermally very stable. PISTON RINGS Two 1mm thick piston rings, also made in Italy, minimize friction and thus increase performance and speed stability. Otherwise they are identical [...]

bgm - Item number: BGM2200H Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,00 kg Category: Engine> Cylinders> Cylinder heads Other customers who are interested in cylinder head -BGM PRO MRB-Racetour 195 ccm - Lambretta LI 125-150, LIS 125-150, SX 150, DL 125-150, GP 125-150 are interested, also looked for: cylinder head | [...]

The bgm PRO air filter is the perfect replacement for all Series 3 paper filters from the original air filter box. Thanks to the fine-meshed stainless steel net, the bgm filter not only offers excellent filter performance, but also a significantly improved air throughput than the standard part. The filter performance can even be increased when using filter oil. For normal road use [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Set of engine oil dipstick and gear oil dipstick BGM PRO made of CNC milled, high-strength aluminum. Available in silver or black anodized Suitable for all Piaggio Leader / Quasar 125-300ccm engines 1: 1 replacement for the original plastic dipstick No tools required High-quality manufacture (dipstick with thread + high-strength screw adhesive secured in the head) Incl. O-ring Ready for direct installation ENGINE OIL CHECK Do not run the engine warm, if necessary [...]

Inexpensive and high-quality solution from BGM to renovate an old ignition base plate. Pre-assembled cable whips are supplied to re-solder them to an existing alternator instead of the old defective cable. The cables have professionally crimped cable plugs with shrink tubing insulation as well as stripped and pre-tinned ends for attachment to the base plate. The right bougier tube for cable protection [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers have asymmetrical degrees of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm engine silent rubbers supplied in pairs, the chassis gains directional stability, steering precision and rigidity. The assembly is easy and offers eg [...]

bgm - Item number: 7676252 Availability: In stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,06 kg Category: Motor> Motor housing> Retaining plate Other customers who are interested in retaining plate ignition coil / CDI -BGM ORIGINAL- Vespa PX 80 (V8X1T), PX 125 (VNX1T, VNX2T), PX 150 (VLX1T), PX 200 (VSX1T), Rally 200 (VSE1T [...]

Premium quality! The side panel rubber of the PX series differs in the thickness of the rubber profile. Basically interchangeable, the so-called PX Lusso model series (from year of construction 1984) uses significantly thicker rubber side panels. Their profile covers more area, both on the side panel and on the frame. Since there are no side panel rubbers in decent quality at a reasonable price on [...]

Screw for attaching the luggage compartment / glove compartment to the frame. Is inserted from the fender side below the cascade through the holes in the main frame and countered on the back. TIP: The PX models use a total of 4 screws. The older models such as Rally, Sprint etc. only use this type of screw for the lower fastening straps, ie here only 2 [...]

Cylinder head gasket -BGM PRO- 0,8mm Polini 177ccm (aluminum) bgm - Item number: WS5158 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Seals> Spacer Other customers who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 177 cc- Vespa PX125, PX150, Cosa125, Cosa150, [...]