Manufactured exactly according to our specifications, we have managed to use a very high quality organic pad mixture that is pressure and temperature stable on the one hand, but is still low in wear. The whole thing combined with a very good grip to always have the full torque on the rear wheel. Even with a very high spring force used, the separation path is [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

bgm - Item number: BGM0901EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 55mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

Cylinder base gasket -BGM PRO- 5,0mm Polini 133ccm (aluminum) Cylinder base gasket -BGM PRO- 5,0mm Polini 133ccm (aluminum) The 133 is turned off accordingly and set higher. At the same time, you get larger transfer ports and more pleasant control times. Here is the distance for your own conversion, which is already included in the WS5002 kit. bgm - Item number: WS5159 Availability: in stock (Please check the [...]

Electrochoke for Dell'Orto and Arreche carburettors up to 22 mm Ready-to-install spare part in OEM quality bgm - item number: CA800061 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx -Components Other customers who are interested in electrochoke -DELLORTO / ARRECHE / GURTNER - carburettor Ø up to [...]

Conversion set to cable choke so that the choke can be conveniently operated remotely from the handlebar or chassis. Contains the components for the carburetor. If not already available, complete this set with a corresponding choke lever and cable (see accessories). Suitable for flat slide carburetors from Mikuni (TMX30, TMX32), Keihin PWK28 and Polini carburettors, as well as many OKO, Koso and Stage 6 [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Cylinder base gasket -BGM PRO- 1,0mm Polini 207, 210, 221ccm bgm - item number: 3820037 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Others Customers who are interested in Spacer cylinder base -BGM ORIGINAL Polini 207 ccm - 210 ccm - 221 ccm- Vespa PX200, [...]

Open intake manifold for all Piaggio scooters with 2-stroke engine housing (50cc, 125cc, 180cc). The carburetor stands straight back and offers a crisp, short intake path for a clean turning behavior. Better acceleration, free turning and higher top speed! Due to the changed installation position of the carburetor, the original connection hose to the air filter box can no longer be used. With a Ø30mm connection width, [...]

bgm - Item number: BGM2248 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Engine> Cylinder> Screw sets Other customers who are interested in screw set cylinder head RT cylinder - BGM PRO- Lambretta LI, LIS, SX, TV (Series 2-3), DL, GP are interested, also looked for: cylinder head nut | Cylinder head bolts | [...]

BGM Pro Sport bench made by Nisa Italy Based on the very popular Nisa 'Sport 20' bench, we had a BGM version made by NISA. AUTHENTIC LOOK The BGM Pro Sport bench has a beautiful Alfatex cover (embossed waffle pattern) on the sides and back and is also available with gray piping. The seat is also [...]

Brake pads -bgm Pro-. Among others for the following models: Derbi Vamos (v) Italjet Formula 50 97- (v + h) Dragster 50 (v + h) Peugeot Elyseo 50 (v) Speedfight 50 LC (v + h) Squab (v) Zenith (v ) Suzuki Katana (r). Sintered brake pads are a new generation of pads. They are all-metal brake pads that are manufactured in a complex sintering process. With these [...]