We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM8010GLI Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,18 kg Category: Motor> Clutch> Clutch pressure plates Other customers who are interested in disc for clutch pressure plate -BGM PRO Superstrong 10 Springs - Lambretta - Type LI are also interested in: Pressure plate | Clutch | Plate | [...]

BGM Pro Sport tires (3.50-10) fully assembled on aluminum sports rim BGM Pro tubeless (2.10-10) Ready-to-assemble tire set consisting of the first-class BGM Pro sports tires with a speed index S (approved up to 180km / h) and a load index of 59 (243kg per Tires) as well as the exclusive BGM Pro light alloy wheel *. SUITABLE The set is available on all Lambretta series 1-3 models as well as [...]

Gasket set cylinder Piaggio, Gilera 50 AC bgm - Item number: R100689040 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Seals> Gaskets Other customers who are interested in gasket set cylinder -BGM ORIGINAL 50 cc- Piaggio 50 cc AC are also interested in: Gasket set | Cylinder [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved. Improved features are: Ground pressing surfaces for maximum stability of the joint connection and thus the highest possible security against twisting Ground and coated crankpin Forged connecting rod with CNC finishing [...]

The BGM 200ccm cylinder is an improved version of the already reliable and powerful original cylinder. Suitable for the 200cc engines of the Rally200, PX200 and Cosa200 models, the bgm cylinder offers additional safety and performance thanks to an exact honing dimension of 9/100 running clearance as well as a slightly increased compression due to a 0,7mm reduction [...]

bgm - Item number: BGM7891 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,68 kg Category: Frames> Brakes> Brake discs Other customers who wanted brake discs -BGM PRO Ø = 220x129x4,0mm 10o, bolt circle 138mm- is used for BGM PRO Anti-Dive disc brake kit are of interest, also looked for: Brake disc | Disc | Disc [...]

Lambretta cylinder base gasket with a thickness of 1,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]