We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant. bgm - Item number: 7673568 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Clutch> Springs Other customers who are interested in clutch spring -BGM PRO 9N / mm- Vespa PK 50 XL FL [...]

Guide plate for the shift cables from BGM 'Made in Germany'. The sheet metal from BGM is of very high quality and significantly more stable than many retrofit sheets. Made from 1,6mm sheet steel, galvanized. Keeps the shift cables at a safe distance from the exhaust manifold. Is attached directly to the longest stud bolt of the engine housing (near the outlet bend) Is bent to suit the intended use: engines up to and including [...]

Clutch basket BGM PRO Superstrong 2.0 ULTRALUBE Extremely resilient clutch, very easy to use - Made in Germany The Superstrong 2.0 CR clutch combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC machined clutch basket has excellent concentricity and extremely high torsional rigidity. This offers [...]

Cylinder base gasket -BGM PRO- 5,0mm Polini 133ccm (aluminum) Cylinder base gasket -BGM PRO- 5,0mm Polini 133ccm (aluminum) The 133 is turned off accordingly and set higher. At the same time, you get larger transfer ports and more pleasant control times. Here is the distance for your own conversion, which is already included in the WS5002 kit. bgm - Item number: WS5159 Availability: in stock (Please check the [...]

Cylinder head gasket -BGM PRO- 1,5mm Polini 177ccm, DR 177ccm bgm - item number: 3820047 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

Screw for attaching the luggage compartment / glove compartment to the frame. Is inserted from the fender side below the cascade through the holes in the main frame and countered on the back. TIP: The PX models use a total of 4 screws. The older models such as Rally, Sprint etc. only use this type of screw for the lower fastening straps, ie here only 2 [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

BGM PRO Superstrong - the original Extremely resilient coupling, very easy to use - Made in Germany The Superstrong coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and extremely high torsional rigidity. It offers a [...]

Spare part for the BGM PRO Superstrong coupling suitable for Lambretta LI / GP / DL. The coupling base plate has ten spring positions (five are standard) and an exact fit for use with the BGM PRO coupling spider. CNC manufactured from high-strength, nitrided steel. bgm - Item number: BGM8010NG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

Chrome-plated tank cap that is lockable. Suitable for almost all Vespa models from 1948 to 1984. Exceptions are the Rally and SS180 / GS160 models that have a longer arm. Included. 2 Keys. Great quality. Like the original cover, it can be hung with bolts and then opened. (US) bgm - Item number: 5250034 Availability: in stock (Please check [...]