bgm - Item number: BGM1125PKSP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- 50mm - used for BGM PRO BigBpx Touring PK 50-125 exhaust, also searched for: exhaust spring | Spring | Exhaust bracket [...]

bgm - Item number: BGM66060P6 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Workshop requirements> Electronics Other customers who are interested in connector set for cable harness -BGM PRO- Type series 060 AM SpecialSeal, 0.85-1.25mm², waterproof - 6 plug contacts are of interest, also looked for: Plug | Cable | Ignition stator | [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

Disc brake made in Germany with braking torque support (Antidive). This effectively prevents the annoying bottoming out when braking. This means that the large braking force of the disc brake can be used optimally. The Antidive also enables the assembly of softer fork springs, as these no longer have to absorb a bottoming out due to the high braking torque. This improves driving behavior and comfort [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: BGM6606BL19 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Frames> Electronics> Turn signals Other customers who are looking for cable adapter kit, rear turn signal conversion -BGM PRO- Vespa GTS125-300 HPE (model years 2019-) - interested in using Moto Nostra LED indicators with dynamic LED running lights, [...]

Complete exhaust adapter for Vespa T5 models. This means that all exhaust systems of the PX80-125-150 engines can also be used on the T5. Incl. 2x locking nut M8 with collar (not shown). (US) bgm - Item number: 3330592 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,33 kg Category: Engine> Exhaust> Exhaust manifold [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]