High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

BGM pro special tool for the end shield of the rear wheel bearing of all Vespa Wideframe models. Thanks to its clever construction, this tool can be used for both hole stitch sizes (Ø37 + 43mm). It offers the possibility of pre-tensioning the tool on the nut to be loosened. Due to the identical thread pitch of the tool and nut, the preload is fully retained during loosening, preventing slipping.

bgm - Item number: BGM6475G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 2,40 kg Category: Workshop requirements> Trains Other customers who are interested in outer cover -BGM ORIGINAL, PE inner cover- Ø outside = 5mm (l = 25 meters) - interest in gray, also looked for: outer shell | Train | Coat | Outer cable | [...]

bgm - Item number: BGM8010NA Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutch cover plates Other customers who are interested in clutch cover plate -BGM PRO Superstrong- Lambretta LI, LI S, SX. TV (series 2-3), DL / GP interested, also searched for: clutch cover plate | Cover disk | Cover plate | [...]

bgm - Item number: BGM7987 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,77 kg Category: Frames> Wheels> Rims Other customers who wanted rims -BGM PRO tubeless 2.10-10 inches Aluminum Vespa (type PX) - Vespa Smallframe V50, 50N, Special, PV, ET3, PK50-125 (S / XL / XL2), Largeframe PX, T5, [...]

bgm - Item number: BGM0900EX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Exhaust> Springs Other customers who are interested in exhaust springs -BGM ORIGINAL- stainless steel (10 pieces ) - 50mm, also searched for: exhaust spring | Spring | Exhaust bracket | Exhaust retaining spring | Manifold spring | Retainer [...]

Enables the scooter to be parked quickly and conveniently in the garage, carport, shed, etc. Also ideal for use on a lifting platform, while the two-wheeler is being transported on the loading area of ​​a van or trailer. Reliably fixes the vehicle on the front wheel in a vertical position. To do this, simply drive the front wheel into the seesaw, it folds with [...]

bgm - Item number: 3330039 Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM PRO 166/172 / 177 cc- Vespa PX80, PX125, PX150 - 4.0mm (without cut-outs for overcurrent channels), also looked for: Spacer | [...]

bgm - Item number: BGM7982 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: Frames> Wheels> Rims Other customers who are interested in rims -BGM PRO, tubeless, 2.10 -10 inch aluminum- Lambretta LI series 1-3, LI S, SX, TV series 2-3 - black matt are interested, searched [...]

Reinforced locking ring from BGM Pro with increased material thickness and greater pre-tensioning force. This has holes so that it can be easily used with circlip pliers. The BGM Pro retaining rings are an ideal addition to all clutch baskets, especially if they are equipped with strong springs. All BGM Superstrong couplings from 2017 contain this ring type in series. bgm [...]

bgm - Item number: 3820053 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Pinasco 177 ccm- Vespa PX80, PX125, PX150 - 2.0mm are interested, also looked for: Spacer | Cylinder base | Distance seal | [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The motor housing is protected. Is used to mount the split roller bearing of the main shaft in the small engine half (Lima side). Material: 42CroMo4 (1100Nmm² tensile strength!) Surface: blue galvanized [...]