When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

Intake manifold BGM PRO for Dellorto PHBL24 / 25, Polini CP23 / 24 carburettor Suitable for Vespa GS150 (VS2 to VS5), GS2 (VD1TS), GS3 (VD2TS) Passage: Ø24mm Connection width: Ø30mm Fastening: 3-hole rubber connection steel, painted black With With this intake manifold carburetors of 24-25mm can be driven and thus the performance of the engine can be increased significantly. The carburetor is backwards in the direction of travel [...]

BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM / Viton® * CORRECT HEIGHT (20x62x7MM INSTEAD of 20x62x6.5MM) The coupling-side BGM PRO shaft sealing ring has an overall height of 7mm instead of the 6.5mm usual with other manufacturers. The BGM PRO shaft seal is based on the original old model from Piaggio. Anyone who takes apart an old original engine will [...]

Specific plugs as used by Piaggio in the Vespa PK, PX and Cosa models as well as almost all automatic vehicles. Perfect for re-wiring your own cable branches or for restoration. We also have the matching connector housings. TIP: The contacts should be processed with crimping pliers for optimal contact and tensile strength (see accessories). [...]

Latest version of the Lambretta bgm shock absorber. Compared to its predecessor, many details have been further optimized. The biggest innovation is the ability to adjust the height of the shock absorber by 10 mm. This allows additional space to be created between the frame and the suction cup. New features: bushings with silent rubbers mounted progressively wound spring rebound and compression damping with hard marking [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

bgm - Item number: BGM5310BP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,55 kg Category: Motor> Brakes> Brake pads Other customers who are interested in brake shoes -BGM PRO Ø = 127 × 20 mm for brake drum BGM5310- Vespa 8 "rear, 1 mount, Vespa Wideframe V1T to V15T (h), V30T to V33T (h), VM [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more durable and safe on the road. The non-contact CDI ignitions are almost indestructible and reliable, and the light output with a modern, regulator-supported on-board electrical system is around

BGM Pro SC SPORT shock absorbers -Sporty- Comfortable -Adjustable-With TÜV- Sportiness paired with outstanding optics. With factory pre-configured damping, spring preload (pre-load) continuously adjustable. HARMONIOUS The BGM Pro SC SPORT coilover kit convinces with its harmonious basic set-up. Intended for sporty driving on the road, the predefined specific damper setting and spring rate is an optimal balance of sportiness and suitability for everyday use. [...]

bgm - Item number: 3330399 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug ring eyelet 4,5mm Ø = 1,0 -1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | Round connector | [...]

Lambretta cylinder base gasket with a thickness of 1,0 mm for the large engine blocks with 200-250 ccm displacement. Ideal to compensate for connecting rod lengths, differences in the heights of the engine sealing surfaces, twisted cylinders or to be able to experiment with the control times. The size of the overflow channels is dimensioned so that it corresponds to the standard overflows. Ideally, this should match the engine block and cylinder.

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]