bgm - Item number: BGM0291HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø46mm- Vespa P80X , PX80, PX80E - 1.0mm, also searched for: Spacer | Cylinder head | Distance seal | Distance | [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. The size M7x25mm is suitable for use as an adjusting screw for the rear brake cable on the engine.

BGM PRO brake shoes with lining material 'MADE IN GERMANY' QUALITY The BGM Pro brake shoes are manufactured exclusively for BGM by one of the most renowned Italian brake lining manufacturers. The covering material comes from the German manufacturer Beral. The aluminum base is cast in the original shape, so a perfect fit is always guaranteed. MATERIAL + PERFORMANCE The pad mixture for the [...]

Two-part series resistor set with 10 watt resistance. This makes it possible to reduce the excessively high frequency after installing LED indicators. So LED indicators can be used without a special LED indicator relay. The set is ready-made so that it can be used in parallel in the indicator cable. The resistor is connected as if you were [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The material is spared. Used to mount the inner needle bearing (facing the wheel) of the front brake anchor plate of the Vespa PX, T5, Cosa and PK models. [...]

BGM small parts for the brake cable fastening are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high quality of the material enables reliable fastening of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6485X Availability: in stock [...]

The bgm Pro kick starter pinions are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) and then case-hardened. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. They are manufactured exactly according to Piaggio original dimensions. Always consistently high quality. No compromise. LUBRICATION GROOVE As a special feature, the bgm Pro pinions also have a lubricating groove in the [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

bgm - Item number: BGM0292HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Seals> Spacer Other customers who are interested in Spacer cylinder head -BGM ORIGINAL Ø52.5mm- Vespa PX125, Cosa125, GT125, GTR125, TS125, Super125 - 1.0mm are interested, also looked for: Spacer | Cylinder head | Distance seal [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers have asymmetrical degrees of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm engine silent rubbers supplied in pairs, the chassis gains directional stability, steering precision and rigidity. The assembly is easy and offers eg [...]