Complete BGM PRO rear brake cable with a strong Ø3mm inner cable diameter (factory specification Innocenti last GP / DL models). BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

BGM Pro gear parts are ultra-solid material. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest demands. The very good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion extremely resistant to wear. Better than Piaggio Ware. Always consistently high quality. No compromise. BETTER Usable for all [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

BGM PRO SportTouring seat for Vespa Sprint, GT, GTR, Super, TS, GL, VNA, VBA, VNB, VBB, T4, Rally180 / 200, GS160, SS180 - the best combined to perfection The SportTouring seat is exclusively for BGM PRO by made by a traditional bench manufacturer in Italy. It combines all the positive properties of a touring-friendly bench with the look of a sports bench in the [...]

bgm - Item number: BGM2225HS20 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 2,0 - XNUMXmm are interested, also looked for: Spacer | [...]

Not suitable for Piaggio 50cm automatic (stock too wide, please use BGM0333 here (12x17x13mm) bgm - item number: BGM0334 Availability: in stock (please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> ball bearings Other customers who were interested in connecting rod bearings -BGM ORIGINAL (12x17x15mm) - Piaggio 70/80 cc, Vespa 50 [...]

Lambretta cylinder head gasket with a thickness of 2,5 mm and a diameter of 65,0 mm. Ideal to compensate for connecting rod lengths, compression heights, longer strokes or twisted cylinders. bgm - Item number: BGM0243 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacers [...]

Mocking tool for all cast cylinders with a bore of 32-89 mm. The ideal tool to remove tracks quickly and with on-board resources. Even a cordless screwdriver is sufficient. Move the honing tool evenly and slowly up and down in the cylinder and a beautiful cross-cut decorates the cylinder liner in no time. If the piston has also noticed something, you can carefully [...]

bgm - Item number: BGM7916 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Motor> Clutch> Ball bearings Other customers who wanted needle roller bearings -BK 0712- (07x14x12mm) - BGM ORIGINAL- (used for clutch shaft / clutch cover Vespa V50 (from 1978), PV125 (from 1978), ET3 (from 1978), PK [...]

abc W 01 2,46 0,60 24,00 W 03 2,48 1,40 20,00 W 04 2,48 1,40 18,00 W 05 2,46 1,40 18,00 W 06 2,50 1,00 24,00 W 07 2,50 1,40 18,00 W 08 2,50 1,40 16,00 W 09 2,50 1,40 20,00 W 10 2,50 1,80 16,00 W 11 2,50 1,80 18,00 W 12 [...]

The BGM Superstrong for Lambretta already has a "built-in" clutch compressor system. The Superstrong coupling can be easily compressed with just two screws and long nuts. On the face of the coupling spider, two of the legs are marked with a point, at the bottom of which is the threaded hole for the screw. Here the screws are used for pre-tensioning [...]