If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

bgm - Item number: BGM6887S30 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Rubber parts> Carburettor connecting rubbers Other customers who are interested in connecting rubber with flange inlet system -BGM ORIGINAL Smart Flow- AW = Ø30mm, hole stitch = 60mm - PHBL25, TMX24 are interested, also looked for: connecting rubber | Flange | Carburetor [...]

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand, it serves as a storage container for amounts of up to 1000ml and at the same time, small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower bottle body and has graduation marks in 10 ml increments up to 60 ml.

Suitable for suspension strut BGM7790B. bgm - Item number: BGM7790BASP Availability: out of stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Shock absorbers> Springs Other customers who are looking for shock absorber springs rear, soft, black -BGM PRO R12 COMPETITION, 365mm- Vespa Primavera 125, Vespa Primavera 150, Vespa Sprint 125, [...]

Complete ignition system for: Aprilia: SR (Bj. 94-00), Scarabeo (Bj. 94-00), Rally, Area 51, Sonic Benelli: 491 (till Bj. 02-03), K2 (till Bj. 02-03 ), Naked, Pepe Beta: Eikon Italjet: Dragster Malaguti: F10 (up to year 93) MBK: Flipper, Nitro, Ovetto, Evolis, Fizz, Forte Yamaha: Why, Aerox, Neos, Breeze, Axis Corresponds to the original spare part, thus in very best quality. Excellent [...]

The quality of the bgm ORIGINAL CDIs is at the OEM level. In addition, they are open CDIs. This means that no speed limiter is integrated in the CDI. This allows your engine to rev up to the max. The bgm ORIGINAL CDIs are subject to very strict quality controls. This ensures that: a constant and strong ignition spark over the entire engine speed range [...]

Very nice and heavy quality. Replaces countless special tools that only fit on one model at a time. bgm - Item number: BGM8800 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Motor> Clutch> Tools Other customers who are interested in clutch holder / flywheel holder -BGM ORIGINAL Ø = 90 -125mm- all automatic scooters are interested, looked [...]

bgm - Item number: BGM2581 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,19 kg Category: Engine> Carburetor> Intake manifold Other customers who are interested in intake manifold for BGM1550 -BGM PRO Ø24mm for Dellorto PHBL24 / 25, Polini CP23 / 24- Vespa Wideframe 125ccm Vespa V1 to V15, V30 to V33, VN, VM, [...]

Like the Italian PK XL125 models, the Indian-made SE2 motor housings can be actuated with just one (rigid) pull. However, the hole in the housing for the abutment bushing attached to the train (with which the train is supported against the housing) is larger than usual in Indian housings. Our adapter resembles the too large [...]

Conversion wiring harness for retrofitting to: Vespatronic ignition system in Rally, Sprint, VBB, Super, VNA, VNB, etc. The retrofitting to a more modern alternator / ignition type is a tried and tested means to be more permanent and safer on the road. The non-contact CDI ignitions are almost indestructible and reliable, as is the light output with a modern, regulator-supported on-board electrical system.

bgm - Item number: 3330399 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Workshop requirements> Electronics Other customers who are interested in cable lug ring eyelet 4,5mm Ø = 1,0 -1,5mm²- 10pcs. interested, also searched for: cable lug | Electrics | Connection | Cable | Cable connector | Flat plug | Ring eyelet | Round connector | [...]

Noble BGM PRO aluminum cover for the engine cover of Vespa GT, GTV, GTS (until 2019), LX, S, ET4 Cover for the coupling nut of the Vario cover on the left side of the vehicle. This is centrally located in the field of vision and offers a nice opportunity to significantly upgrade the appearance of the scooter with little effort. MATERIAL & SURFACE High-strength aluminum (6061) which finally [...]