BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

bgm - Item number: BGM16C10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Cylinder> Piston clips Other customers who are interested in piston clip set -BGM PRO 16mm x 1,00 , 2200mm- C-Type (BGM2225N / BGMXNUMXN) also searched for: Piston clip | Piston lock | Clip | Backup | Piston | Safety clip [...]

bgm - Item number: 3332778KTS1 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,22 kg Category: Frame> Body> Frame parts Other customers who are interested in edge protection including tread strip end pieces set -BGM ORIGINAL- Vespa PK S, PK S Lusso, PK SS, PK ETS - plastic - silver are interested, also looked for: [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

Assembly set for reinforced chain tensioners. This set consists of a washer plate that successfully prevents the chain tensioner from bending open. In addition, M 6 studs are included in the scope of delivery, which, in contrast to the screws usually used, considerably protect the thread. The set is rounded off by locking nuts, which make the locking plate superfluous. Security fanatics who wear belts and suspenders [...]

bgm - Item number: BGM2105U4DP Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust manifold -BGM PRO Clubman V4.0- Lambretta series 1-3 - unpainted interested, also looked for: exhaust manifold | Elbow | Exhaust flange | Exhaust manifold | [...]

Front bgm shock absorber with 16-way adjustable rebound adjustment Developed as an update for all types of fork springs. Works particularly well with the progressive BGM Pro fork springs. Easy to install, fit directly onto the standard additional shock absorber mounts. No welding work or further modifications required. Perfect addition to the rear bgm shock absorbers. The damper should be installed in such a way that the adjuster [...]

bgm - Item number: BGM8820 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Gearbox> Springs Other customers who are interested in gear spring -BGM PRO XL- Vespa V50, V90, SS50, SS90, PV125, ET3, PK S, PK XL are also interested in: Shift spring | Shift spring | [...]

Open intake manifold for Minarellis with horizontal cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, since the original airbox [...]

High quality new edition of the cable box for the classic Vespa PX models built up to 1984 and the Sprint Veloce models, both with battery. Not available from Piaggio for a long time, we had them reproduced in a very good quality. High quality plastic, exactly 1: 1 like the original. NOTE: Also available for PX models up to 1984 without [...]

The crankshaft of the Vespa PK125 ETS models has the most stable crankshaft stub of all smallframe engines. It has a massive diameter of Ø25mm at the bearing seat on the generator side and is therefore able to withstand all loads. The ETS crankshaft type is therefore very popular for tuned engines. Due to the large diameter, however, the crankshaft cannot be used with the standard [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]